On Mon, Sep 30, 2024 at 05:12:31PM +0000, Joe Damato wrote:
> Add support for netdev-genl, allowing users to query IRQ, NAPI, and queue
> information.
>
> After this patch is applied, note the IRQs assigned to my NIC:
>
> $ cat /proc/interrupts | grep ens | cut -f1 --delimiter=':'
> 50
> 51
> 52
>
> While e1000e allocates 3 IRQs (RX, TX, and other), it looks like e1000e
> only has a single NAPI, so I've associated the NAPI with the RX IRQ (50
> on my system, seen above).
>
> Note the output from the cli:
>
> $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
> --dump napi-get --json='{"ifindex": 2}'
> [{'id': 145, 'ifindex': 2, 'irq': 50}]
>
> This device supports only 1 rx and 1 tx queue. so querying that:
>
> $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
> --dump queue-get --json='{"ifindex": 2}'
> [{'id': 0, 'ifindex': 2, 'napi-id': 145, 'type': 'rx'},
> {'id': 0, 'ifindex': 2, 'napi-id': 145, 'type': 'tx'}]
>
> Signed-off-by: Joe Damato <jdam...@fastly.com>
Reviewed-by: Simon Horman <ho...@kernel.org>
