> -----Original Message-----
> From: Joshi, Sreedevi <[email protected]>
> Sent: Thursday, September 25, 2025 11:25 AM
> To: [email protected]
> Cc: [email protected]; Carrillo, Erik G <[email protected]>;
> Joshi, Sreedevi <[email protected]>; Kitszel, Przemyslaw
> <[email protected]>; Loktionov, Aleksandr
> <[email protected]>
> Subject: [PATCH] idpf: fix issue with ethtool -n command display
>
> From: Erik Gabriel Carrillo <[email protected]>
>
> When ethtool -n is executed on an interface to display the flow steering
> rules, "rxclass: Unknown flow type" error is generated.
>
> The flow steering list maintained in the driver currently stores only the
> location and q_index but other fields of the ethtool_rx_flow_spec are not
> stored. This may be enough for the virtchnl command to delete the entry.
> However, when the ethtool -n command is used to query the flow steering
> rules, the ethtool_rx_flow_spec returned is not complete causing the
> error below.
>
> Resolve this by storing the flow spec (fsp) when rules are added and
> returning the complete flow spec when rules are queried.
>
> Also, change the return value from EINVAL to ENOENT when flow steering
> entry is not found during query by location or when deleting an entry.
>
> Add logic to detect and reject duplicate filter entries at the same
> location.
>
> Example:
> Before the fix:
> ethtool -n eth1
> 2 RX rings available
> Total 2 rules
>
> rxclass: Unknown flow type
> rxclass: Unknown flow type
>
> After the fix:
> ethtool -n eth1
> 2 RX rings available
> Total 2 rules
>
> Filter: 0
> Rule Type: TCP over IPv4
> Src IP addr: 10.0.0.1 mask: 0.0.0.0
> Dest IP addr: 0.0.0.0 mask: 255.255.255.255
> TOS: 0x0 mask: 0xff
> Src port: 0 mask: 0xffff
> Dest port: 0 mask: 0xffff
> Action: Direct to queue 0
>
> Filter: 1
> Rule Type: UDP over IPv4
> Src IP addr: 10.0.0.1 mask: 0.0.0.0
> Dest IP addr: 0.0.0.0 mask: 255.255.255.255
> TOS: 0x0 mask: 0xff
> Src port: 0 mask: 0xffff
> Dest port: 0 mask: 0xffff
> Action: Direct to queue 0
>
> Fixes: ada3e24b84a0 ("idpf: add flow steering support")
> Signed-off-by: Erik Gabriel Carrillo <[email protected]>
> Co-developed-by: Sreedevi Joshi <[email protected]>
> Signed-off-by: Sreedevi Joshi <[email protected]>
> Reviewed-by: Przemek Kitszel <[email protected]>
> Reviewed-by: Aleksandr Loktionov <[email protected]>
> ---
> drivers/net/ethernet/intel/idpf/idpf.h | 3 +-
> .../net/ethernet/intel/idpf/idpf_ethtool.c | 57 ++++++++++++-------
> 2 files changed, 38 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/idpf/idpf.h
> b/drivers/net/ethernet/intel/idpf/idpf.h
> index 4f4cf21e3c46..ec759bc5b3ce 100644
> --- a/drivers/net/ethernet/intel/idpf/idpf.h
> +++ b/drivers/net/ethernet/intel/idpf/idpf.h
> @@ -269,8 +269,7 @@ struct idpf_port_stats {
>
> struct idpf_fsteer_fltr {
> struct list_head list;
> - u32 loc;
> - u32 q_index;
> + struct ethtool_rx_flow_spec fs;
> };
>
> /**
> diff --git a/drivers/net/ethernet/intel/idpf/idpf_ethtool.c
> b/drivers/net/ethernet/intel/idpf/idpf_ethtool.c
> index 1352f18b60b0..6a39cc1feeb5 100644
> --- a/drivers/net/ethernet/intel/idpf/idpf_ethtool.c
> +++ b/drivers/net/ethernet/intel/idpf/idpf_ethtool.c
> @@ -38,11 +38,13 @@ static int idpf_get_rxnfc(struct net_device *netdev,
> struct ethtool_rxnfc *cmd,
> cmd->data = idpf_fsteer_max_rules(vport);
> break;
> case ETHTOOL_GRXCLSRULE:
> - err = -EINVAL;
> + err = -ENOENT;
> spin_lock_bh(&vport_config->flow_steer_list_lock);
> list_for_each_entry(f, &user_config->flow_steer_list, list)
> - if (f->loc == cmd->fs.location) {
> - cmd->fs.ring_cookie = f->q_index;
> + if (f->fs.location == cmd->fs.location) {
> + /* Avoid infoleak from padding: zero first,
> then assign fields */
> + memset(&cmd->fs, 0, sizeof(cmd->fs));
> + cmd->fs = f->fs;
> err = 0;
> break;
> }
> @@ -56,7 +58,7 @@ static int idpf_get_rxnfc(struct net_device *netdev, struct
> ethtool_rxnfc *cmd,
> err = -EMSGSIZE;
> break;
> }
> - rule_locs[cnt] = f->loc;
> + rule_locs[cnt] = f->fs.location;
> cnt++;
> }
> if (!err)
> @@ -158,7 +160,7 @@ static int idpf_add_flow_steer(struct net_device *netdev,
> struct idpf_vport *vport;
> u32 flow_type, q_index;
> u16 num_rxq;
> - int err;
> + int err = 0;
>
> vport = idpf_netdev_to_vport(netdev);
> vport_config = vport->adapter->vport_config[np->vport_idx];
> @@ -184,6 +186,29 @@ static int idpf_add_flow_steer(struct net_device *netdev,
> if (!rule)
> return -ENOMEM;
>
> + fltr = kzalloc(sizeof(*fltr), GFP_KERNEL);
> + if (!fltr) {
> + err = -ENOMEM;
> + goto out_free_rule;
> + }
> +
> + /* detect duplicate entry and reject before adding rules */
> + spin_lock_bh(&vport_config->flow_steer_list_lock);
> + list_for_each_entry(f, &user_config->flow_steer_list, list) {
> + if (f->fs.location == fsp->location) {
> + err = -EEXIST;
> + break;
> + }
> +
> + if (f->fs.location > fsp->location)
> + break;
> + parent = f;
> + }
> + spin_unlock_bh(&vport_config->flow_steer_list_lock);
> +
> + if (err)
> + goto out;
> +
> rule->vport_id = cpu_to_le32(vport->vport_id);
> rule->count = cpu_to_le32(1);
> info = &rule->rule_info[0];
> @@ -222,28 +247,20 @@ static int idpf_add_flow_steer(struct net_device
> *netdev,
> goto out;
> }
>
> - fltr = kzalloc(sizeof(*fltr), GFP_KERNEL);
> - if (!fltr) {
> - err = -ENOMEM;
> - goto out;
> - }
> + /* Save a copy of the user's flow spec so ethtool can later retrieve it
> */
> + fltr->fs = *fsp;
>
> - fltr->loc = fsp->location;
> - fltr->q_index = q_index;
> spin_lock_bh(&vport_config->flow_steer_list_lock);
> - list_for_each_entry(f, &user_config->flow_steer_list, list) {
> - if (f->loc >= fltr->loc)
> - break;
> - parent = f;
> - }
> -
> parent ? list_add(&fltr->list, &parent->list) :
> list_add(&fltr->list, &user_config->flow_steer_list);
>
> user_config->num_fsteer_fltrs++;
> spin_unlock_bh(&vport_config->flow_steer_list_lock);
> + goto out_free_rule;
>
> out:
> + kfree(fltr);
> +out_free_rule:
> kfree(rule);
> return err;
> }
> @@ -297,14 +314,14 @@ static int idpf_del_flow_steer(struct net_device
> *netdev,
> spin_lock_bh(&vport_config->flow_steer_list_lock);
> list_for_each_entry_safe(f, iter,
> &user_config->flow_steer_list, list) {
> - if (f->loc == fsp->location) {
> + if (f->fs.location == fsp->location) {
> list_del(&f->list);
> kfree(f);
> user_config->num_fsteer_fltrs--;
> goto out_unlock;
> }
> }
> - err = -EINVAL;
> + err = -ENOENT;
>
> out_unlock:
> spin_unlock_bh(&vport_config->flow_steer_list_lock);
> --
> 2.25.1
Please disregard this. Will resubmit the whole series.
Thanks
Sreedevi
