On 17/04/2026 13:43, Ruinskiy, Dima wrote:
Commit 3c7bf5af21960 ("e1000e: Introduce private flag to disable K1")
disabled K1 by default on Meteor Lake and newer systems due to packet
loss observed on various platforms. However, disabling K1 caused an
increase in power consumption.
To mitigate this, reconfigure the PLL clock gate value so that K1 can
remain enabled without incurring the additional power consumption.
Re-enable K1 by default, but keep the private flag to support disabling
it via ethtool. Additionally, introduce a DMI quirk table, so that K1 may
be disabled by default on known problematic systems. Currently, this
includes the Dell Pro 16 Plus, where the issue has been reported to persist
despite the changes to the PLL lock timeout.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220954
Link:
https://lists.osuosl.org/pipermail/intel-wired-lan/Week-of-Mon-20250623/048860.html
Link:
https://lists.osuosl.org/pipermail/intel-wired-lan/Week-of-Mon-20260330/054059.html
Signed-off-by: Dima Ruinskiy <[email protected]>
Co-developed-by: Vitaly Lifshits <[email protected]>
Signed-off-by: Vitaly Lifshits <[email protected]>
Fixes: 3c7bf5af21960 ("e1000e: Introduce private flag to disable K1")
---
v3: add DMI quirk
v2: add comment for the PLL timeout value and revisit the commit message
v1: initial version
---
drivers/net/ethernet/intel/e1000e/ich8lan.c | 3 +++
drivers/net/ethernet/intel/e1000e/netdev.c | 15 ++++++++++++++-
2 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c
b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index dea208db1be5..aa90e0ce8aca 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1594,6 +1594,9 @@ static s32 e1000_check_for_copper_link_ich8lan(struct
e1000_hw *hw)
phy_reg &= ~I217_PLL_CLOCK_GATE_MASK;
if (speed == SPEED_100 || speed == SPEED_10)
phy_reg |= 0x3E8;
+ else if (hw->mac.type == e1000_pch_mtp ||
+ hw->mac.type == e1000_pch_ptp)
+ phy_reg |= 0x1D5;
else
phy_reg |= 0xFA;
e1e_wphy_locked(hw, I217_PLL_CLOCK_GATE_REG, phy_reg);
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c
b/drivers/net/ethernet/intel/e1000e/netdev.c
index 4d553c6edd98..a7605e453382 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -25,6 +25,7 @@
#include <linux/pm_runtime.h>
#include <linux/prefetch.h>
#include <linux/suspend.h>
+#include <linux/dmi.h>
#include "e1000.h"
#define CREATE_TRACE_POINTS
@@ -58,6 +59,17 @@ static const struct e1000_info *e1000_info_tbl[] = {
[board_pch_ptp] = &e1000_pch_ptp_info,
};
+static const struct dmi_system_id disable_k1_list[] = {
+ {
+ .ident = "Dell Pro 16 Plus PB16250",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Dell Pro 16 Plus PB16250"),
+ },
+ },
+ {}
+};
+
struct e1000_reg_info {
u32 ofs;
char *name;
@@ -7748,7 +7760,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct
pci_device_id *ent)
/* init PTP hardware clock */
e1000e_ptp_init(adapter);
- if (hw->mac.type >= e1000_pch_mtp)
+ /* disable K1 by default on known problematic systems */
+ if (hw->mac.type >= e1000_pch_mtp && dmi_check_system(disable_k1_list))
adapter->flags2 |= FLAG2_DISABLE_K1;
/* reset the hardware with the new settings */
--
2.34.1
Tested-by: Moriya Kadosh <[email protected]>
