> -----Original Message----- > From: Intel-wired-lan <[email protected]> On Behalf Of > [email protected] > Sent: 23 July 2026 19:34 > To: [email protected] > Cc: [email protected]; [email protected]; [email protected]; > [email protected]; [email protected]; [email protected]; [email protected]; > Nguyen, Anthony L <[email protected]>; Kitszel, Przemyslaw > <[email protected]>; [email protected]; [email protected]; > Mohammad Heib <[email protected]> > Subject: [Intel-wired-lan] [PATCH iwl-next v4 3/3] i40e: trigger PF reset > when re-enabling ATR via ethtool > > From: Mohammad Heib <[email protected]> > > Toggling flow-director-atr via ethtool private flags does not trigger a ring > reset. If ATR was disabled while fd_ena was cleared in the TX queue HW > context (e.g. after a ring reset with both ATR and ntuple off), re-enabling > ATR causes i40e_atr() to inject FDIR descriptors into a queue where fd_ena is > still 0. > > Trigger a PF reset when ATR is re-enabled so that fd_ena is re-evaluated > based on the current flag state. > > Signed-off-by: Mohammad Heib <[email protected]> > --- > drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 7 +++++++ > 1 file changed, 7 insertions(+) >
Tested-by: Rinitha S <[email protected]> (A Contingent worker at Intel)
