Hi, I worked a little bit more on my problem. Is it possible, that
QAbstractSocket::ShareAddress has not effect on Qt 5.1.1/64bit/linux?
I cannot get UPnP messages from my xbmc, when it runs on the same machine. With
Qt4 this was not a problem. What I did now: I took the multicastreceiver from
the examples. Only code I changed in it was the IP and the port:
239.255.255.250 and 1900. UPnP multicast.
Now I checked with wireshark. When the multicastreceiver was not running, I was
able to see the UPnP multicast messages, which were sent by the xbmc. When the
multicastreceiver was running, no xbmc multicastmessages were visible in
wireshark or in the multicastreceiver.
UPnP multicast messages from other machines were received.
Also when I start a second multicastreceiver, I get:
QNativeSocketEngine::joinMulticastGroup() was not called in
QAbstractSocket::BoundState
I don't think this should happen, when I connect the first one with
QAbstractSocket::ShareAddress
Guido
> Hi,
> I currently port a Qt4 program to Qt5. I have the following trouble with a
> multicast socket.
>
> On Qt4:
>
> mReceiver = new QUdpSocket(this);
> mReceiver->bind(1900, QUdpSocket::ReuseAddressHint|QUdpSocket::ShareAddress);
> mReceiver->joinMulticastGroup("Address");
>
> Works great.
>
> Now under Qt5:
> First I got a warning:
> QAbstractSocket: cannot bind to QHostAddress::Any (or an IPv6 address) ...
> yada yada
>
> Ok, so I changed the code:
>
> mReceiver->bind(QHostAddress(QHostAddress::AnyIPv4),1900,
> QUdpSocket::ReuseAddressHint|QUdpSocket::ShareAddress);
> mReceiver->joinMulticastGroup("Address");
>
> Result? No warning. But I don't receive anything on this port either.
>
> Help?
>
> Guido
>
> _______________________________________________
> Interest mailing list
> [email protected]
> http://lists.qt-project.org/mailman/listinfo/interest
>
_______________________________________________
Interest mailing list
[email protected]
http://lists.qt-project.org/mailman/listinfo/interest
