Well, if I use 'Port Name' on switches such as Cisco 2950, 3550, 2900M & G etc.. they all tell me "FastEthernetx/y" where X & Y is the module and port.
You might have to use SNMPv2 for this to work, though.. I know Interface Alias' only work with SNMPv2.
/J
On 26. august 2003, at 21:49PM, Klouda, Matt wrote:
I was referring to Catalyst Switch Ports.
Routers work fine, but anything w/ CatOS won't translate the ifIndex to the
Module/Port.
-----Original Message----- From: Jakob Peterh�nsel [mailto:[EMAIL PROTECTED] Sent: Tuesday, August 26, 2003 12:55 AM To: InterMapper Discussion Subject: Re: Switch ports
Hi All.
On 25. august 2003, at 17:43PM, Klouda, Matt wrote:
And, it will only show you ifIndex - not the actual Module/Port number.
Unless something changed in the new version???
Ahh, that has been there for a long time.
Label options: Port Number: 2 (ifIndex is I'm right..) Port Name: Fastethernet0/2 (Module and port) Interface Alias: <The name assigned to 'Description'> (at least on Cisco)
And there is other...
Hope it helps...
____________________________________________ Jakob Peterh�nsel Technical Engineer Tel: +45 7022 1014 Fax: +45 7022 1013 Mob: +45�22 68 49 61 [EMAIL PROTECTED] www.NetPoint.com
____________________________________________________________________
List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
____________________________________________ Jakob Peterh�nsel Technical Engineer Tel: +45 7022 1014 Fax: +45 7022 1013 Mob: +45�22 68 49 61 [EMAIL PROTECTED] www.NetPoint.com
<<inline: image.tiff>>
The information contained in this message is confidential or protected by law.
If you are not the intended recipient, please contact the sender and delete this message. Any unauthorised copying of this message or unauthorised distribution of the information contained herein is prohibited.
smime.p7s
Description: S/MIME cryptographic signature
