No that just sets the maximum percentage shown... so that it if a circuit never rises about 50% I can set the upper boundary to 50. However if I don't uncheck auto-adjust and if the circuit is inspired to reach to 55% the scale will auto-adjust to 100%
I desire a scale that is *not* a percentage of 100& utilization of the max allowed bandwidth. I rather it would be a scale that displays the bandwidth by Mbps on the vertical axis. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Richard E. Brown Sent: Monday, November 24, 2003 9:27 PM To: [EMAIL PROTECTED] Subject: Re: Feature request | Graphs Mike: --- Mike Lieberman wrote: Set the total value of a chart to 45Mbps (or 150Mbps for instance). Have the vertical axis report usage based on bandwidth consumed for each circuit within the graph. Have the ability to set "threshold" dividers at specific numberical values such as 1.5. --- end of quote --- If I'm not mistaken, InterMapper can already do this. For example, I just used the Chart Options popup to set the maximum scale of a chart to 45; and set 10 dividers with 4 sub-dividers to get ticks for 5, 10, 15, 20..., 45, and subdividers showing each 1 mpbs. For more about the Chart Options, look at: http://www.intermapper.com/immanual/chapter5/stripcharts/options.html Does this do what you want? Rich Brown [EMAIL PROTECTED] Dartware, LLC http://www.dartware.com 10 Buck Road, PO Box 130 Telephone: 603-643-2268 Hanover, NH 03755-0130 USA Fax: 603-643-2289 ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
