Mark, A host / network device negotiate about the ethernet speed en duplexing. Is it possible that the connected networkdevice fixed 10/half or 100/half ethernet advertises?
with regards Hans Heger RIVM the Netherlands -> this is the article for 10.2 The article te configure the speed/duplex in 10.2 = http://docs.info.apple.com/article.html?artnum=107475 Mark Persiko <[EMAIL PROTECTED] To: InterMapper Discussion <[EMAIL PROTECTED]> .us> cc: Sent by: InterMapper-Talk Subject: RE: Mac OS X Link Speed and Duplex <[EMAIL PROTECTED] rtware.com> 26-11-03 21:52 Please respond to InterMapper Discussion Hello- I found this at Apple's website: http://docs.info.apple.com/article.html?artnum=135014 However, I have a PowerMac G4 with built-in Ethernet. There is a separate procedure for setting speed/duplex in 10.2, but I always get Half-duplex when I try. Will 10.2 only support half-duplex on this hardware? Will 10.3 support full-duplex on this hardware? Thanks, Mark - Mark C. Persiko, Network Engineer - IT Division, Boulder Valley School District -----Original Message----- From: Ashe, James P. [mailto:[EMAIL PROTECTED] Sent: Friday, November 21, 2003 9:32 AM To: [EMAIL PROTECTED] Subject: OT: Mac OS X Link Speed and Duplex sorry for the off topic message, but could someone tell me how to set the network adapter speed/duplex in Jaguar to 100/Full. Thanks in advance. James P. Ashe Systems Analyst 2 ETSU Office of Information Technology [EMAIL PROTECTED] OIT Help Desk - 423.439.4648 ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
