Re: [IM-Talk] Custom Probe Limits

[Frank Knapp]

Title: Re: [IM-Talk] Custom Probe Limits

Howdy all again (I'm just going nuts here...). Are there known limits on the number of OIDs that can be polled/displayed in a custom probe? I am working on a probe for our M-13 DS3 multiplexers that polled five OIDs for each T1 (28 of them) and, of course, displayed them. Ultimately, I wanted to set alarm thresholds on those performance stats and then notifications for when those thresholds were exceeded. I got all done with the probe, copied it to the probes folder and when I told Intermapper to reload probes, the service just died without any errors. I wasn't sure if it was an OID limit or if there was a display limit. Either way, can I get around this somehow?

==================================

Jesse-

I am sure that the IM crew will have ideas but we have polled/displayed “many” OIDs..  
One item that comes to mind is possibly limiting the number of OIDs at a time-

<snmp-device-properties>
    maxvars = "20"
</snmp-device-properties>

If you haven’t tried the ‘debug access’ please take a look at-
http://www.intermapper.com/docs/WebHelp/ch5-infowindows/debug.html

Once in debug you can turn on/off different helpful information to pin down issues.
 
hth

frank



Jesse DuPont, EIEIO*
Information Services Manager
Powder River Energy Corporation
Voice 307.283.3531 x2700
FAX 775.806.3630
*The presence of these letters is in no way intended to diminish the effort put forth by people who have actually earned the right to have meaningful letters after their name.