À (At) 9:53 -0400 2006-08-25, Christopher L. Sweeney écrivait (wrote) :
>You need to have set up your custom probe correctly to make this possible.
>However, we haven't released documentation for this yet, so you wouldn't have
>known how to so (or even that it was necessary.) With a little luck, that will
>be available a little later today. In the meantime, I've attached a .zip file
>with two sample probes that implement SNMP tables. These go in your Probes
>folder, of course.
>
>There are also in the .zip file two MIBs that are necessary for the probes to
>work. The IP-MIB should already be present in your system. The MicroTik MIB
>you will need to import (or place it in your MIBS folder and restart the
>InterMapper daemon/service).
So, if I understand correctly, it is not possible to query a SNMP table for any
device at will, but one must set the probe for the selected device to something
special ?
I tried to install the supplied files. Then, when trying to set the Probe of a
device to the 'Microtik tables Test Probe' (if that is really what I am
supposed to do), I get a message box telling me: 'Probe unchanged. Unable to
set probe. Could not change probe type for 1 device(s); device limit reached.'.
Mmmm, maybe I'll wait for the full explanation that is coming.
Thank you for your answer, anyway.
Best regards.
--
/AF
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
