On Mar 9, 2007, at 9:49 AM, Brian Megel wrote:
All Intermapper users:
We are experiencing a problem that has us baffled and wanted to
know if
anyone else has seen this issue.
On occasion we get an alarm from our Intermapper application such
as no
SNMP response, device down or the such but when we try to access the
device from another computer everything is fine. This alarm will
continue for several minutes and then suddenly clear on its own.
I have not been able to narrow the problem down to a specific probe or
device type.
This is just weird.
Brian -
Check the processor load on the device at the time the trouble is
occurring. Cisco and perhaps other routers will drop SNMP requests
and in severe cases stop all responses if the processor load is
high. This results in a No SNMP response and in severe cases I have
seen no response at all which results in Device Down responses from
InterMapper.
Hope this helps
- Jerry
------------------------------------------------------------------------
-------------------------
Jerry W. Segers Phone: 770-475-3781
1233 Roper Road Fax: 770-475-6331
Canton, GA 30115` eMail: [EMAIL PROTECTED]
HTTP://WWW.WNRMAgic.COM
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
