Hi Jeff, I sent this reply to your question on 3/27/07:
**We have many customers who are using the SNMP MIB II probe on SonicWall firewalls, so you should give that a try first (assuming this model is SNMP-enabled). If you run into any difficulties or have additional questions, please send an email to [EMAIL PROTECTED] and we will be happy to assist you further.** By "default probe", I assume you are using the Ping/Echo probe. If this is the case, have you tried using the SNMP MIB II probe? If you cannot get the device to respond to the SNMP MIB II probe with relevant data, I would be happy to open a support ticket for you. Regards, Janice Losgar Dartware, LLC -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Jeff C. Anderson Sent: Monday, May 07, 2007 1:49 PM To: InterMapper List Subject: [IM-Talk] Probe for SonicWall Security Appliance Didn't get any response a while ago when I asked this question, so will try again. Is anyone using a probe other than ping/echo on a SonicWall security appliance? Our model is a Pro 3060, and we seem to have dropped packet issues with the default probe (I assume due to the device ignoring pings when busy). .................................................................... Jeff C. Anderson Technology Director Pella Community School District Telephone (School Administration): (641) 628-1111 Telephone (Pella High School): (641) 628-3870 Mobile Telephone: (641) 780-0252 Email: [EMAIL PROTECTED] [EMAIL PROTECTED] .................................................................... ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
