Hi,
I am using windows based Intermapper Ver 4.6.8.
Trying to configure the SMS alert using GSM modem with command line
notifier.
I was able to send manual SMS using below command.
echo %1 | gnokii.exe --sendsms +919940011308
I have added the above line into manicks_sms.bat. moved the all the files
related to gnokii to Tools directory.
As per the procedure i have added the below line in to the command line
notifier by like below
manicks_sms.bat "${MESSAGE}"
While clicking Test notifier it is not working .
Does any one tried this ? What could be problem. I have tried to using
gammu, but gammu itself not able to detect the GSM modem.
Thanks in Advance.
Regards
Manicka Raja A
Assistant Manager ? Corporate IT
A R I C E N T
ESPEE IT Park
Plot-5, Jawaharlal Nehru Salai,
Ekkattuthangal,
Chennai ? 600 097 India
Main +9 144.442.2667 7
Fax +9 144.442.2610 0
Mobile +9 199.400.1130 8
Voip +6 666.520.6677
*********************** Aricent-Restricted ***********************
"DISCLAIMER: This message is proprietary to Aricent and is intended solely for
the use of
the individual to whom it is addressed. It may contain privileged or
confidential information and should not be
circulated or used for any purpose other than for what it is intended. If you
have received this message in error,
please notify the originator immediately. If you are not the intended
recipient, you are notified that you are strictly
prohibited from using, copying, altering, or disclosing the contents of this
message. Aricent accepts no responsibility for
loss or damage arising from the use of the information transmitted by this
email including damage from virus."
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
