Randy,
Try adding these lines to a custom snmp probe.
<snmp-device-variables-ondemand>
cdp, 1.3.6.1.4.1.9.9.23.1.2.1.1, TABLE, "Cisco Discovery Protocol
Neighbors"
cdp/IntIndex, 1.3.6.1.4.1.9.9.23.1.2.1.1.6[0:1], DEFAULT, "Local
Interface Index"
cdp/DeviceID, 1.3.6.1.4.1.9.9.23.1.2.1.1.6, DEFAULT, "Neighbor ID"
cdp/DevicePort, 1.3.6.1.4.1.9.9.23.1.2.1.1.7, DEFAULT, "Neighbor Port"
cdp/DevicePlatform, 1.3.6.1.4.1.9.9.23.1.2.1.1.8, DEFAULT, "Neighbor
Platform"
</snmp-device-variables-ondemand>
<snmp-device-display>
\5ib\ On Demand information \0p\ \3ip\
${cdp:CDP Neighbor Table}
\0p\ \0p\
</snmp-device-display>
Chris
Randy Millsop <[EMAIL PROTECTED]>
Sent by: <[email protected]>
04/24/2008 03:49 PM
Please respond to
"InterMapper Discussion" <[email protected]>
To
[email protected]
cc
Subject
[IM-Talk] probe for CDP - Cisco Discovery Protocol?
I'm still looking for a probe to obtain CDP information from Cisco
switches or any other device supporting CDP, such as our Mitel VoIP
phones.
Has anyone discovered how to do this?
Thanks,
Randy Millsop
Network Administrator
San Joaquin Delta College
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
