Why am I getting [NoSuchName] in my Status Window?
I'm trying to monitor the number of active DSO channels in a PRI on a Cisco
3845 ISR router/gateway. First PRI reports fine but the second gives me
'[NoSuchName]' regardless of how I modify the probe.
The OID exists. There's no 'OID does not exist' error in the debug. Here's
the output of 'snmpwalk'. First OID works fine. The second OID is the one I'm
trying to monitor so I'm polling for an valid existing SNMP OID.
# snmpwalk -c <RO Deleted> -v 2c <IP Address Deleted>
.1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.0
SNMPv2-SMI::enterprises.9.10.19.1.1.9.1.3.0.0 = Gauge32: 0
# snmpwalk -c <RO Deleted> -v 2c <IP Address Deleted>
.1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.1
SNMPv2-SMI::enterprises.9.10.19.1.1.9.1.3.0.1 = Gauge32: 0
Here's the relevant sections of the probe. I changed the DS0 to DSzero to
confirm I wasn't typing the capital letter O instead of the number 0.
port0ActiveDS0s, .1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.0, DEFAULT, "Port 0/0/0 -
Number of Active DSOs"
port1ActiveDSzeros, .1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.1, DEFAULT, "Port 0/0/1
- Number of Active DSOs"
\B5\DS0 Status:\0P\
\4\Port 0/0/0 - Number of Active DS0s:\0\ ${port0ActiveDS0s}
\4\Port 0/0/1 - Number of Active DS0s:\0\ ${port1ActiveDSzeros}
Again, the first PRI (port 0/0/0) reports fine. The second always gives me
'[NoSuchName]'
Thanks for any help you can provide.
Steve Himebaugh.
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
