Andrey,
I'm working on documentation of variables available for access from probes.
The ${devicename} variable works in the <script-output> section of a TCP
Probe.
There is a ${_remoteaddress} variable available in the <script> section,
which is where you would likely be passing the host name to the device. That
one would be worth a try - it's possible it will resolve it.
I'm hoping to have a list of available variables in a tech tip in the next
day or so.
Best regards,
Bob Merrill
(Dartware's doc guy)
----- Original Message -----
From: "Andrey Gordon" <[EMAIL PROTECTED]>
To: "InterMapper Discussion" <[email protected]>
Sent: Wednesday, December 10, 2008 11:15 AM
Subject: Re: [IM-Talk] Variables
${devicename} does not seem to work. I just get NOT FOUND when using that.
__________________________________________________________
Andrey Gordon | Integrity Interactive | Network Engineer | +1.781.398.3518
From: James Hardin <[EMAIL PROTECTED]>
Reply-To: InterMapper Discussion <[email protected]>
Date: Wed, 10 Dec 2008 10:36:08 -0500
To: InterMapper Discussion <[email protected]>,
InterMapper
Discussion <[email protected]>
Subject: RE: [IM-Talk] Variables
You can use the variable ${devicename}.
Jim
------------------------------------------------------------------------------
---------------
Jim Hardin Senior Software Engineer
IDT Cable Telephony Phone: 1-973-438-2444
1608 Rt. 88 W Suite 300 Email: [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>
Brick, NJ 08724
------------------------------------------------------------------------------
----------------
________________________________
From: [email protected] on behalf of Andrey Gordon
Sent: Wed 12/10/2008 9:57 AM
To: InterMapper Discussion
Subject: [IM-Talk] Variables
I¹m parsing the Dev guide in search of the available variables with no
luck.
Can someone point me to the page where available variables are listed,
please?
In particular, right now I¹m looking if there is a way to pass in an
actual
hostname instead of the IP address to my CLI probes. Meaning, right now, I
pass in ${ADDRESS} which passes in the IP address even if I put in
hostname
when adding a node. Is there a way to pass the value I put in the ³add
device² dialog?
Thank you,
Andrey
__________________________________________________________
Andrey Gordon | Integrity Interactive | Network Engineer | +1.781.398.3518
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
