- Edit snmpd.conf to your liking and make sure its actually running - Allow SNMP traffic through VMWare firewall for the monitored host (done in VirtualCenter) - it's blocked by default
You have to have the HP Insight Agents for Linux / VMware installed on the monitored host to get the HP information The VMWare table should return data as long as SNMP is running and vmware firewall ports opened on the monitored host. -----Original Message----- From: InterMapper-Talk@list.dartware.com [mailto:intermapper-t...@list.dartware.com] On Behalf Of Andrey Gordon Sent: Tuesday, March 24, 2009 3:19 PM To: InterMapper Discussion Subject: Re: [IM-Talk] HP Proliant Probe for Intermapper Available Did you have to do something else other then editing snmpd.conf on the ESX host and starting the snmpd? For some reason, I get no readings in the probe. I have VMware3 running on DL380 __________________________________________________________ Andrey Gordon | Integrity Interactive | Network Engineer | +1.781.398.3518 > From: Joe Vogt <jv...@utherverse.com> > Reply-To: InterMapper Discussion <InterMapper-Talk@list.dartware.com> > Date: Tue, 24 Mar 2009 11:04:06 -0700 > To: <InterMapper-Talk@list.dartware.com> > Subject: [IM-Talk] HP Proliant Probe for Intermapper Available > > Hi everyone > > > > It's been a long time since I have created any probes. However, I now manage > a bunch of HP Proliant servers, and so I have built an Intermapper probe for > HP Proliant servers that pretty much does what HPSIM does. > > > > It monitors the hardware status for CPU, memory, power supplies, ILM log, > fans, temperature and local storage. Changes in hardware status will trigger > probe status changes and notifications / alerts. > > > > It also provides a bunch of informative tables showing the file system, HP > agent software, firmware revs and what's in the PCI slots. > > > > Since I manage mostly VMWare ESX servers running on HP Proliant servers, the > probe also contains a VMWare ESX table that shows currently running guest > VMs. > > > > I based this probe off of my older Dell PowerEdge probe. I would update my > Dell probe but alas I do not have any Dell servers in my environment. I like > this HP probe a lot, but I've only worked on it for a couple of days so I > may make some changes. I may post an update to the probe at some time. > > > > I hope you find this helpful! > > > > You can find the probe and associated MIB files in this ZIP file hosted off > my home server: > > > > http://www.joevogt.org/Intermapper-HP-Proliant-Probe.zip > > > > I encourage someone from Dartware to grab this and post it on the Dartware > site. > > > > Enjoy, and let me know if you have questions or comments! - j...@joevogt.org > > > > Cheers > > Joe Vogt > > Part-Time Intermapper Probe Dude > > > > ____________________________________________________________________ > List archives: > http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ > To unsubscribe: send email to: intermapper-talk-...@list.dartware.com > ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: intermapper-talk-...@list.dartware.com ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: intermapper-talk-...@list.dartware.com
