Is there any plan to support per-volume treshold in the furture ? (other than using the group technique)
On Mon, Mar 16, 2009 at 22:53, Christopher L. Sweeney <[email protected]>wrote: > At 1:22 PM -0700 3/16/09, Jefferson Cowart wrote: > >> I have what I think is a feature request for the Host Resources probe >> that's distributed with Intermapper. (If there's a way to do this >> already, I can't find it.) On my server that I use for backups I have a >> couple large volumes (each about 3.5 TB) that I use for disk-to-disk >> backups. The OS volume is a relatively small 140GB. What I'd like to do >> is be able to set Intermapper to set the device to warning/alarm status >> when the OS volume reaches 90%/95% (14/7GB free) or when the large >> volumes reach 99% (35GB free). Is there a way to have different >> thresholds for different volumes? Could this feature be added in some >> future version? >> > > This can't be done in 5.0.10. > > You might be able to approximate it in 5.1 however, by creating a probe > group with more than one Host Resources probe in it, with one instance of > the probe ignoring all but the small disks and one instance of the probe > ignoring all but the large disks, and then setting the thresholds > appropriately for each. This would mean more than one poll from InterMapper > to the target system, but it would only count as one device against your > license count. > > -- Christopher > > -- > ================================================ > Christopher L. Sweeney > Dartware, LLC > http://www.dartware.com/ > > ____________________________________________________________________ > List archives: > http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ > To unsubscribe: send email to: [email protected] > > ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
