Hi,
The wireless devices do support SNMP, both on the Controller units and
the actual AP's.
We have a set (1 controller, 2 AP's) at the office, but I have not
looked into getting user data out yet.
Would be nice with some statistics like those from the Cisco AP probe.
Jakob Peterhänsel
"Be a part of the Love Generation - carry a smile, not a gun."
- JP, May 2006
Email: [email protected]
AIM: Marook
Phone: +45 30787715
On 22/10/2009, at 20.06, Janice Losgar wrote:
On 10/22/2009 1:48 PM, Bryan VonDeylen wrote:
Any possibility of adding HP ProCurve Probes to the next version of
Intermapper?
Especially the wireless products acquired from Colubris?
Hi Bryan,
Most HP Procurve switches support SNMP, in which case you can use
any of the included SNMP probes to monitor the switches for various
statistics. A list of SNMP probes and the data that can be gathered
is located on this page:
http://download.dartware.com/docs/UserGuide/Content/09-Reference/09-02-Probe_Reference/snmpprobes.htm
If there are other statistics that you are interested in retrieving
that the existing SNMP probes cannot return, you always have the
option of creating a custom SNMP probe. This page should help get
you started. It includes links to all the relevant documentation
that you would need:
http://www.intermapper.com/custom-probes-a-snmp/171-writing-custom-snmp-probes-
Do you happen to know if the wireless devices support SNMP?
--
Best regards,
Janice Losgar
Dartware, LLC
603)643-9600 x114
____________________________________________________________________
List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
