Does the drac 5 probe that is posted in the community probe section
work with the drac 6, Mehmet? We are getting our first drac 6 this
week as well.
Sent from my iPhone...
On Apr 20, 2010, at 2:40 AM, Janice Losg <[email protected]>
wrote:
Hi Mehmet,
According to Dell's documentation, the iDrac6 can alert you to
managed node issues via an SNMP trap, and it also supports IPMI.
You may be able to use the Trap Viewer probe to display the trap
variables; however, if you wish to alert on these variables, you
would then need to create a custom SNMP trap probe. The
documentation isn't clear as to whether the device can be probed via
SNMP, but if so, then a custom SNMP probe would work.
I'm not sure what information may be available via IPMI, but we do
have an IPMI probe that you could try.
The third option would be to create a custom TCP probe that gathers
data from the iDrac6 web interface.
Below are some helpful links:
http://www.intermapper.com/custom-probes-a-snmp/179-handling-traps-in-custom-snmp-probes
http://www.intermapper.com/custom-probes-a-snmp/169-custom-probes-a-snmp
http://www.intermapper.com/custom-probes-a-snmp/203-tips-for-scripts-in-tcp-probes
Regards,
Janice Losgar
Dartware, LLC
On Apr 20, 2010, at 12:04 AM, Mehmet Akcin wrote:
is there a way to probe Dell's iDrac6 and see information that you
could possibly via the webserver of idrac card?
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
