Greetings from Amazon.com.
Thanks for your feedback about Amazon.com Delivers E-mail Subscriptions.
We appreciate the time you took to write to us, but please note that we
cannot reply to messages.
Need help with your account or order? This automated response will direct
you to the right place if you need further assistance.
You can let us know which types of mail you wish or do not wish to receive
from Amazon.com by visiting your Customer Communications Preferences page:
http://www.amazon.com/communications
If you need to modify an unshipped order or make changes to your account
or subscriptions, you may do so online at any time via Your Account:
http://www.amazon.com/your-account
If your question is not answered by the above links, we invite you to
search our Help Desk at:
http://www.amazon.com/help
We hope our online resources meet all your needs. If you've explored the
above links but find you still need to get in touch with us, please click
the "Contact Customer Service" link on our main Help page.
Thanks for shopping at Amazon.com.
Sincerely,
Amazon.com Customer Service
http://www.amazon.com
P.S. You received this message because Amazon.com received the following
message:
Date: Tue, 27 Apr 2010 14:24:49 -0700
From: "Jefferson Cowart" <[email protected]>
To: "InterMapper Discussion" <[email protected]>
Subject: [IM-Talk] Cisco 28xx Probe w/ Power Supply Monitoring
As I've mentioned on the list recently I've been working to add power
source monitoring to the existing 28xx probe from mindSHIFT. At this
point I think it's working properly. (It's properly alerting on my 28xx
that has a failed power supply and not complaining about the other two.)
I figured I'd pass it along to the list in case it was helpful to anyone
else.
Could someone at dartware add this to the contributed probe list online?
--
Thank You
Jefferson Cowart
Network and Systems Administrator
Claremont University Consortium
<!--
################################################################################
################################################################################
##
## Custom Probe for InterMapper created by mindSHIFT Technologies, Inc.
##
## $RCSfile: com.mindshift.snmp.cisco.isr.28xx,v $
##
## Author: $Author: jeremy $
##
## Revisions: $Log: com.mindshift.snmp.cisco.isr.28xx,v $
## Revisions: Revision 1.1 2009/04/10 13:31:40 jeremy
## Revisions: initial import of 28xx probe, tested against 2821
## Revisions: 1.3 - Adding Power Supply Monitoring - jcc
##
##
## Copyright: (c) 2009, mindSHIFT Technologies, Inc.
##
################################################################################
################################################################################
-->
<header>
"type" = "custom-snmp"
"address_type" = "IP"
"port_number" = "161"
"flags" = "MINIMAL,NOLINKS"
"package" = "com.mindshift"
"probe_name" = "snmp.cisco.isr.28xx"
"human_name" = "Cisco ISR 28xx"
"display_name" = "Network Devices/Cisco/ISR 28xx"
"version" = "1.3"
</header>
<description>
This probe provides all, or a subset of the following information:
Informational: Manufacturer, Model, Serial Number, Software Version
OS/Build
Tables: Specific for each device-type.
Resource Usage: CPU Usage %, Free RAM %, Logged In Users, Processes,
Disk Usage
Hardware Health: Power, Voltage, Cooling, Temperature, Disk Array
User-Settable Parameters:
CPU Usage - Set alert thresholds for CPU Usage %
Low Memory - Set alert thresholds for Free RAM %
</description>
<parameters>
"CPU Usage - Critical %" = "95"
"Free RAM - Critical %" = "5"
</parameters>
<snmp-device-variables>
<!-- Informational -->
modelNumber, 1.3.6.1.2.1.47.1.1.1.1.13.1,
DEFAULT, ""
modelDesc, 1.3.6.1.2.1.47.1.1.1.1.2.1,
DEFAULT, ""
serialNumber, 1.3.6.1.2.1.47.1.1.1.1.11.1,
DEFAULT, ""
softwareVersion, 1.3.6.1.4.1.9.2.1.1.0,
DEFAULT, ""
<!-- CPU & Memory Stuff -->
cpuUsage, 1.3.6.1.4.1.9.9.109.1.1.1.1.3.1,
DEFAULT, ""
freeRAMBytes, 1.3.6.1.4.1.9.9.48.1.1.1.6.1,
DEFAULT, ""
usedRAMBytes, 1.3.6.1.4.1.9.9.48.1.1.1.5.1,
DEFAULT, ""
freeRAMPct, ((${freeRAMBytes} * 100) /
(${freeRAMBytes} + ${usedRAMBytes})), CALCULATION, ""
<!-- Power -->
acPowerStatus, 1.3.6.1.4.1.9.9.13.1.5.1.3.1,
STRING, ""
</snmp-device-variables>
<snmp-device-variables-ondemand>
cpuTable, 1.3.6.1.4.1.9.9.109.1.1.1.1,
TABLE, "CPU Stats"
cpuTable/ID, 1.3.6.1.4.1.9.9.109.1.1.1.1.2,
DEFAULT, "CPU Index"
cpuTable/5min, 1.3.6.1.4.1.9.9.109.1.1.1.1.5,
DEFAULT, "5 min. Busy %"
memoryTable, 1.3.6.1.4.1.9.9.48.1.1.1,
TABLE, "RAM Info"
memoryTable/Name, 1.3.6.1.4.1.9.9.48.1.1.1.2,
DEFAULT, "Pool Name"
memoryTable/Used, 1.3.6.1.4.1.9.9.48.1.1.1.5,
DEFAULT, "Used Bytes"
memoryTable/Free, 1.3.6.1.4.1.9.9.48.1.1.1.6,
DEFAULT, "Free Bytes"
ifTable, 1.3.6.1.2.1.2.2,
TABLE, "Interface Table"
ifTable/Descr, 1.3.6.1.2.1.2.2.1.2,
DEFAULT, "Description"
ifTable/Type, 1.3.6.1.2.1.2.2.1.3,
DEFAULT, "Type"
ifTable/Speed, 1.3.6.1.2.1.2.2.1.5,
DEFAULT, "Speed"
ifTable/PhysAddress, 1.3.6.1.2.1.2.2.1.6,
DEFAULT, "MAC Address"
ifTable/AdminStatus, 1.3.6.1.2.1.2.2.1.7,
DEFAULT, "Admin Status"
ifTable/OperStatus, 1.3.6.1.2.1.2.2.1.8,
DEFAULT, "Operator Status"
powerTable, 1.3.6.1.4.1.9.9.13.1.5.1,
TABLE, "Power Supply Table"
powerTable/Desc, powerTable.2,
DEFAULT, "Description"
powerTable/State, powerTable.3,
DEFAULT, "State"
powerTable/Source, powerTable.4,
DEFAULT, "Source"
</snmp-device-variables-ondemand>
<snmp-device-thresholds>
critical: (${cpuUsage} >= ${CPU Usage - Critical
%}) "CPU Usage - Critical"
critical: ((${freeRAMBytes} != "") &&
(${freeRAMPct} <= ${Free RAM - Critical %})) "Free RAM - Critical"
alarm: (${acPowerStatus} != "normal") "AC
Power Supply Problem"
</snmp-device-thresholds>
<snmp-device-display>
\P0\
\BUM\Informational \P0\
Model Number : ${modelNumber}
Model Description : ${modelDesc}
Serial Number: : ${serialNumber}
Software Version : ${softwareVersion}
\BUM\Information Tables \P0\
${cpuTable:CPU Usage} / ${memoryTable:Memory Usage} / ${ifTable:Interfaces}
\BUM\Resource Usage \P0\
CPU Usage : ${cpuUsage} % / Crit: ${CPU Usage - Critical %} %
Free RAM : ${freeRAMPct} % / Crit: ${Free RAM - Critical %} %
\BUM\Hardware Health \P0\
${powerTable:Power Supplies}
AC Power Status : ${acPowerStatus}
\P0\
</snmp-device-display>
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
