Chris,
I searched the InterMapper-Talk archives and it looks like some Mitel VoIP
phones support CDP. Chris Romo suggested trying the following to retrieve the
CDP information:
Try adding these lines to a custom snmp probe.
<snmp-device-variables-ondemand>
cdp, 1.3.6.1.4.1.9.9.23.1.2.1.1, TABLE, "Cisco Discovery Protocol
Neighbors"
cdp/IntIndex, 1.3.6.1.4.1.9.9.23.1.2.1.1.6[0:1], DEFAULT, "Local
Interface Index"
cdp/DeviceID, 1.3.6.1.4.1.9.9.23.1.2.1.1.6, DEFAULT, "Neighbor ID"
cdp/DevicePort, 1.3.6.1.4.1.9.9.23.1.2.1.1.7, DEFAULT, "Neighbor Port"
cdp/DevicePlatform, 1.3.6.1.4.1.9.9.23.1.2.1.1.8, DEFAULT, "Neighbor
Platform"
</snmp-device-variables-ondemand>
<snmp-device-display>
\5ib\ On Demand information \0p\ \3ip\
${cdp:CDP Neighbor Table}
\0p\ \0p\
</snmp-device-display>
Regards,
Janice Losgar
Dartware, LLC
(603) 643-9600 x114
On Apr 30, 2010, at 2:52 PM, Chris D'Amore wrote:
>
>
> I would like to know if anyone has built any custom probes for Mitel IP
> Telephony equipment?
>
> Thank you,
>
> Chris
>
> ____________________________________________________________________
> List archives:
> http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
> To unsubscribe: send email to: intermapper-talk-...@list.dartware.com
>
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: intermapper-talk-...@list.dartware.com
