I have enabled the SNMP - Basic OID probe on a couple of servers, and I am confused about the results.
1: How does this probe determine TX/RX/minute errors? The reported uptime is correct, but it is reporting TX/RX errors on eth0, yet the host does not report errors on eth0 using ifconfig. 2: Are the TX/RX details a cumulative counter? If so, when is it reset? At 03:30 this morning, the host was showing over 4 billion TX/RX/minute errors which is impossible to me to believe, but at 09:25, the TX/minute rate was 106072 and RX/minute rate was 2697. Using ifconfig on the host, no TX/RX errors are reported, nor are there interface errors on the switch port it is connected to. Thank you for any help. Randy Baker[/img] -------------------- m2f -------------------- Read this topic online here: http://forums.dartware.com/viewtopic.php?p=2579#2579 ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
