On 7/15/10 11:13 AM, Andrew Kee wrote:
I am attempting to write a custom SNMP probe for a RoomAlert24E. I have gotten
the probe to gather and display all of the data I need, but I cannot seem to
set up alarm/warning states based on it when i set the thresholds artificially
low.
The thresholds are delimited by <snmp-device-thresholds> tags. The word
"threshold" should be plural.
The specification in your probe is essentially ignored; the probe is
acting as if no thresholds are defined. You just need to fix the begin
and end tags of your thresholds section.
<snmp-device-threshold>
critical: ${Real_Internal_Temp}> ${Internal_Temp_Critical} "Internal Temp
Critical"
critical: ${Real_External_Temp}> ${External_Temp_Critical} "External Temp
Critical"
alarm: ${Real_Internal_Temp}> ${Internal_Temp_Alarm} "Internal Temp
Alarm"
alarm: ${Real_External_Temp}> ${External_Temp_Alarm} "External Temp
Alarm"
alarm: ${Real_PowerV1}> ${Voltage_High_Alarm} "Voltage High Alarm"
alarm: ${Real_PowerV1}< ${Voltage_Low_Alarm} "Voltage Low Alarm
alarm: ${Real_PowerV2}> ${Voltage_High_Alarm} "Voltage High Alarm"
alarm: ${Real_PowerV2}< ${Voltage_Low_Alarm} "Voltage Low Alarm
alarm: ${Real_PowerV6}> ${Voltage_High_Alarm} "Voltage High Alarm"
alarm: ${Real_PowerV6}< ${Voltage_Low_Alarm} "Voltage Low Alarm
warning: ${Real_Internal_Temp}> ${Internal_Temp_Warning} "Internal Temp
Warning"
warning: ${Real_External_Temp}> ${External_Temp_Warning} "External Temp
Warning"
</snmp-device-threshold>
--
Bill Fisher
Dartware, LLC
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
