SNMPwalk from IM is an empty table. SNMPwalk from terminal show all the info as does Mibble.
-- Paul PH: (402) 443-5174 cell: (402) 219-3783 On Aug 16, 2010, at 2:13 PM, William Fisher wrote: > On 8/16/10 2:59 PM, Paul M. Hill wrote: >> 13:57:23 unknown: Send SysInfo2(id=1019d7f0) row = 0, comm = ********, ver >> SNMPv2c >> 13:57:30 unknown: Send SysInfo2(id=1019d7f1) row = 0, comm = ********, ver >> SNMPv2c >> 13:57:37 unknown: Send ICMP Echo(id=1019d7f2) row = 0, comm = ********, ver >> SNMPv2c >> 13:57:38 unknown: AT/IP Echo Reply [DONE] >> 13:57:45 63.175.186.14: Send SysInfo2(id=1019d870) row = 0, comm = >> ********, ver SNMPv1 >> 13:57:50 63.175.186.14: Send SysInfo2(id=1019d871) row = 0, comm = >> ********, ver SNMPv1 >> 13:57:55 63.175.186.14: Send ICMP Echo(id=1019d872) row = 0, comm = >> ********, ver SNMPv1 >> 13:57:55 63.175.186.14: AT/IP Echo Reply [DONE] >> > I'm guessing that the device named "unknown" and 63.175.186.14 are the > devices in question. "unknown" is using SNMPv2c and 63.175.186.14 is using > SNMPv1. > > Try an SNMPWalk for "1.3" on both devices. SNMPWalk will only send a single > variable in the SNMP request. Select the device and choose SNMPWalk... from > the Monitor menu. > > -- > Bill Fisher > Dartware, LLC > ____________________________________________________________________ > List archives: > http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ > To unsubscribe: send email to: [email protected] > > ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
