On 8/24/10 3:45 PM, Andrew Kee wrote:
I am in the process of changing the probes for our 3750s over to a new
probe that will monitor stack status. I noticed that the chart for
CPU Percent Busy (OID: 1.3.6.1.4.1.9.2.1.56.0) is changing to uptime
(OID: 1.3.6.1.2.1.1.3.0) when I change to the new probe. This same
problem does not happen in reverse. When I apply the new probe and
begin charting CPU Percent Busy, the chart will remain CPU Percent
Busy if I switch back to the old probe. The old probe does not chart
uptime at all. The chart will show an error if the line to pull
uptime is removed from the new probe.
Has anyone else run in to this?
To deal with probe changes, InterMapper associates the variable names in
your probes with an internal ID used to identify the specific data sets.
Try to retain existing variable names between your old and new probes.
InterMapper may be falling back on the order of the variables in the
probe if it can't manage to sync with the variable names.
--
Bill Fisher
Dartware, LLC
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
