Thanks Dick...that seems to be the thing I was looking for. -Chris
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Richard M. Colburn Sent: Tuesday, September 21, 2010 10:14 AM To: InterMapper Discussion Subject: Re: [IM-Talk] Remote Probe? On 21 Sep 10, at 1002 , Christopher Brizzell wrote: > Does Intermapper have any sort of remote probe? > > > > Here is my situation - I have a server which is the only device that > is > allowed access through a particular firewall over which I have no > control. On the other side of that firewall are a group of devices > which > I would like to know the up/down status of. A simple ping is fine. I > really do not want to run Intermapper on this server if at all > possible. Chris, You run your InterMapper server on Windows, right? Is the server with access through the firewall also running Windows? If it is, you can use the WMI System Accessibility probe to ping the group of devices from the server with the firewall access. Regards, -Dick -------------------------------------- Richard M. Colburn Dartware, LLC ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
