<snmp-device-variables>
Mbps,
${alActiveSessionThroughputTopTenData.1}/131072, CALCULATION, "Now in Mbps"
</snmp-device-variables>
.
.
.
<snmp-device-display>
\B5\Trango Apex Information\0P\
Active Sessions:\0\ ${alActiveSessionThroughputTopTenData.1} \3IG\bits
per sec.\P0M\
\4\ Mbps:\0\ $sMbps \3IG\Mbits per sec.\P0M\
</snmp-device-display>
--
Paul
PH: (402) 443-5174
cell: (402) 219-3783
On Oct 20, 2010, at 10:38 AM, Chapman, Steve wrote:
> I sure this is easy, but I can't figure it out here is what I need to do
>
>
>
>
> <snmp-device-variables>
>
> -- MIB Variable -- -- OID --
> -- TYPE -- --
>
> alActiveSessionThroughputTopTenData.1,
> 1.3.6.1.4.1.3076.2.1.2.17.3.1.15.1, Default, "Bytes"
>
> </snmp-device-variables>
>
>
>
> \b5\Cisco VPN 3000 Status\p0\
>
> \4\Active Sessions:\0\ ${alActiveSessionThroughputTopTenData.1}
> bps
>
> </snmp-device-display>
>
>
>
>
>
> The above probe ({alActiveSessionThroughputTopTenData.1}) on a cisco
> 3030 vpn give the status of bytes per sec (bps). I need to divide that
> by 131072 to convert it to Megabits per sec (MBps)
>
>
>
> Steve Chapman
>
> LAN Engineer - ccb428e
>
> University of Missouri - St. Louis
>
> 451 computer Center Building #10
>
> One University Boulevard
>
> St. Louis, MO. 63121-4499
>
> 1-314-516-4063 - work
>
> 1-314-245-1617 - pager
>
> 1-314-516-6034 - helpdesk
>
> ____________________________________________________________________
> List archives:
> http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
> To unsubscribe: send email to: [email protected]
>
>
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
