On 12/15/10 10:16 AM, Katiei wrote:
This morning I updated to IM 5.3.7, and when the map started back up, one
Xserve IPMI probe claims the system is powered off: IPMI: Failed to open
session. IPMI_RAKPMessage3 returned error 15.
The xserve is on and working. What is up with this probe? Its a newer model
Xserve, 8 core 2.26 GHz. I double checked the password on the probe was correct
and it had worked right up until the map update.
The IPMI probe supports two different dialects. Try the alternate
dialect from the one you are using, to see if it elicits a better
response. Note that the XServe 2008 model uses the "XServe" dialect and
the XServe 2009 model uses the "Other" dialect. When you use the wrong
dialect, IPMI fails to open the session because each side does the
authentication slightly differently.
--
Bill Fisher
Dartware, LLC
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
