I have not seen a 4500 specific probe, the closest I've seen is the 6500 probe but it doesn't seem to report everything correctly.
Vin -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Wednesday, February 02, 2011 7:00 AM To: InterMapper Discussion Subject: InterMapper-Talk Digest - 02/02/11 InterMapper-Talk Digest - Wednesday, February 2, 2011 Cisco 4500E probes? by "David Fernandes" <[email protected]> Re: [IM-Talk] intermapperd crash by "Richard M. Colburn" <[email protected]> Re: [IM-Talk] Cisco 4500E probes? by "Michael Graziano" <[email protected]> ---------------------------------------------------------------------- Subject: Cisco 4500E probes? From: "David Fernandes" <[email protected]> Date: Tue, 1 Feb 2011 07:58:23 -0500 (EST) Does anyone know if Intermapper has any customized 4500E probes that monitors power supplies and modules? -- David Fernandes New York University ---------------------------------------------------------------------- Subject: Re: [IM-Talk] intermapperd crash From: "Richard M. Colburn" <[email protected]> Date: Tue, 1 Feb 2011 09:22:51 -0500 On 01 Feb 11, at 0506 , Steve Foster wrote: > Upgraded to 5.3.8 yesterday. Just had another crash after changing the > defaults for a map. > > In the debug log it stated that a crash report is send to > [email protected] , but I can't find a report of this in our email relay logs. > > Do you need any more information? Steve, There is a crash report from your server a few hours ago. There also was one from Friday before you did the upgrade to 5.3.8. I'll add you as a requester on the crash report ticket and take it from there. Regards, -Dick -------------------------------------- Richard M. Colburn Dartware, LLC ---------------------------------------------------------------------- Subject: Re: [IM-Talk] Cisco 4500E probes? From: "Michael Graziano" <[email protected]> Date: Tue, 1 Feb 2011 11:21:06 -0500 There are a bunch of probes at http://www.intermapper.com/ucpcisco for Cisco 65xx series equipment - I'm not sure of the MIB is the same for 45xx equipment but it's worth a try (also probably a good place to start :) -MG On Feb 1, 2011, at 7:58 AM, David Fernandes wrote: > Does anyone know if Intermapper has any customized 4500E probes that > monitors power supplies and modules? > > -- > David Fernandes > New York University > ____________________________________________________________________ > List archives: > http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ > To unsubscribe: send email to: [email protected] > ---------------------------------------------------------------------- End of InterMapper-Talk Digest ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
