Dear Jakob, Thanks for your response. I am actually writing an SNMP Agent which requires InterMapper to send me a "ID" (a OctetString) which I use to provide a proper response for a InterMapper custom-snmp probe.
Regards, Leonard Siu -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jakob Peterhänsel Sent: March-17-11 3:16 PM To: InterMapper Discussion Subject: Re: [IM-Talk] Sending Parameter with an SNMP Get request to device Hi, As far as I know, snmp-get can Only read existing data. If you need to Set a variable, you need to issue an snmp-write command first. -- Jakob Peterhänsel "Be a part of the Love Generation - carry a smile, not a gun." - JP, May 2006 AIM: Marook Phone: +45 30787715 Den 17/03/2011 kl. 03.03 skrev QDS - Leonard Siu: > Dear InterMapper experts, > > > > Is it possible to send a parameter with the SNMP get request for a > custom-snmp probe? > > > > For example, I have a custom-snmp device with a device parameter set by > the user which I would need to send to the device. > > > > Regards, > > > > Leonard Siu > > Quantum Data Systems (H.K.) Ltd. > > O: 2304-1199 > > M: 9696-1199 > > Skype ID: leonardsiu > > > > ____________________________________________________________________ > List archives: > http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ > To unsubscribe: send email to: [email protected] > > ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
