I have seen this too. IM is aware of this one, I believe. -- Paul www.PC2MediaSpecialties.com PH: (402) 443-5174 cell: (402) 443-2174
On Apr 27, 2011, at 6:17 PM, Chris Kawchuk wrote: > Hi there IM Folk, > > I have a probe group setup (both of which are SNMP-speaking probes), The > Probes are: > > Juniper EX-Series (thankyou Mindshift!) > SNMP Traffic > > I have selected "SNMP Traffic" as the control probe. > > I am attempting to used the label: > > <SNMP SysName> > <DNS Name> > <Address> > > This is the label I have set for (1) the main probe group, and thinking I may > had to set it additionally in each probe-member: (2) each individual Probe > member. If I use each probe individually, the SNMPSysName properly shows up > in the Label. If I put these two probes into a probe group; SNMPSysName does > not propergate into the top-level label (and hence, is blank on the map). > > Bug? or working as intended? (I.e. if using a probe group, even if it's a > standard SNMP probe, you cannot use SNMP SysName in a label anymore) > > IM Version: Version 5.4.3 (Build B4112), MacOS 10.6.7, Java SE 6 (Apple Inc.) > 64 bit & 32 bit, 1.6.0_24-b07-334 > > - Chris. > > P.S. Both the <DNS Name> and <Address> do properly show up in the main (probe > group / map) label. > > ____________________________________________________________________ > List archives: > http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ > To unsubscribe: send email to: [email protected] > > ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
