Dear Bill,
Thanks for your reply.
I have tested it against InterMapper 5.4.3, and it appears the probe
trap value does not overwrite the non-trap probe value.
The probe value I am looking at is configure as follows in
<snmp-device-variables/>
entPhySensorValue, 1.3.6.1.2.1.99.1.1.1.4.${Virtual
Port}, DEFAULT, "Sensor Value"
I have double check the event log and I am sure the VB is sent as part
of the probe. I have capture the event log entry and pasted it below
(not the relevant VB is the last entry):
05/03 12:41:36 TRAP DCI Integrator Probes:D1339@1
DARTWARE-MIB::intermapperTrap (v2c) {
DARTWARE-MIB::intermapperTimestamp.0 : "05/03 12:41:35",
DARTWARE-MIB::intermapperMessage.0 : "Trap",
DARTWARE-MIB::intermapperDeviceName.0 : "RCKDOR00001340",
DARTWARE-MIB::intermapperCondition.0 : "true",
DARTWARE-MIB::intermapperDeviceAddress.0 : "127.0.0.1/8161",
DARTWARE-MIB::intermapperProbeType.0 : "dcii.truthvalue",
DARTWARE-MIB::intermapper.7.0 : "1", DARTWARE-MIB::intermapper.8.0 :
"2", SNMPv2-SMI::mib-2.99.1.1.1.4.2 : "1" }
Please note ${Virtual Port} is configured as "2" in the Probe settings.
Regards,
Leonard Siu
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Bill Fisher
Sent: April-29-11 9:08 AM
To: [email protected];
[email protected]
Subject: [IM-Talk] Re: A OID variable obtainable through polling and may
arrive as
lsiu wrote:
> Is it possible to have and OID which may be obtain through polling,
but
> may also be overwritten by a SNMP trap. I have tried something like
the
> one below, but it doesn't seem to work:
>
> <snmp-device-variables>
> value, 1.3.1.1.4.5.${index}, DEFAULT
> value, 1.3.1.1.4.5.${index}, TRAPVARIABLE
> </snmp-device-variables>
>
I believe the second trap variable is unnecessary. It should cause an
error because it has the same variable name 'value'. Ordinary
"non-trap" probe variables are updated by traps. The following should do
what you want:
<snmp-device-variables>
value, 1.3.1.1.4.5.${index}, DEFAULT
</snmp-device-variables>
Please let me know if this doesn't work.
-------------------- m2f --------------------
Read this topic online here:
http://forums.dartware.com/viewtopic.php?p=3400#3400
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
