Hi, We have 2 Equallogic SAN units. Does anyone have experience using the probe for Equallogic units?
According to the header of the probe > NOTE ABOUT SAN ID: To get your individual member SAN ID: > snmpwalk -v1 -c public <SAN_IP> 1.3.6.1.4.1.12740.2.1.1.1.9.1 > > That should return the SAN's Member Name, but more importantly it will show > you the 8-digit "SAN ID" that you need to enter in the Set Probe parameters > window. > The rest of the probe depends on it... running the snmpwalk command returns the following: Code: ~$ snmpwalk -v1 -c dell 192.168.250.51 1.3.6.1.4.1.12740.2.1.1.1.9.1 SNMPv2-SMI::enterprises.12740.2.1.1.1.9.1.748492667 = STRING: "san1" SNMPv2-SMI::enterprises.12740.2.1.1.1.9.1.1864665748 = STRING: "san2" Which "8 digit" number am I supposed to use for the SAN ID? Thanks in advance, Brett -------------------- m2f -------------------- Read this topic online here: http://forums.intermapper.com/viewtopic.php?p=4035#4035 ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
