I use the Juniper EX Switch one found here: http://www.intermapper.com/ucpswitch/default.aspx
Made a few modifications to it (i.e show traffic natively so you don't need to probe-group it w/the regular SNMP Traffic probe). We monitor about 100 some-odd EX4200s with it (Various 1G, 10G and Virtual-Chasiss setups). Works for all EX switches I've tried it on running JunOS 10.0R1 all the way to 11.4R3 Used this same mindSHIFT Probe (Thanks Jeremy!) as a basis for a customised Juniper MX Router Probe; monitoring 30-ish MX480s and MX80s with a ton-o-Interfaces. (JunOS 10.4R7.5 at the moment) ... Still working on extending to track MPLS RSVP LSPs; so you can track # of LSPs ingressing/transiting/egressing the device, and whether or not they're on the primary or secondary RSVP paths. We have this tracked in MRTG/RRDTool right now (traffic only), but want to get this into InterMapper as well. (i.e. traffic, and ability to throw an alarm when the primary LSP has failed and it's on the secondary path...). Would be useful for our NOC people (who are asleep half the time at 2:00 am) to know when an RSVP path has flipped over. =) - CK. On 31/05/2012, at 6:06 AM, nrigas wrote: > > Hi Everyone, > > I've been using InterMapper for 2 years now and am still learning new things > and discovering new probes to apply to my switches. > > I'm just wondering what is your favourite probes to place on any brand of > switch? How about a Cisco Switch? > > I have L2 and L3 switches. ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
