We are a very small business running Intermapper. We have two Cisco routers on our network, a 1921 and a 891. I configured these routers to export netflow data to my server running Intermapper. It worked fine.
A few months back I made a few changes to the routers and Flows stopped working. We weren't really using it much, so we didn't try to fix it at the time. We have now identified a use for it and would like to get it back up. I have configured it using the exact same youtube video I used before, but it is still not working. The only thing that has changed is the destination IP which I updated correctly. Here is what I have: ip flow-export source GigabitEthernet0/1/0 ip flow-export version 5 ip flow-export destination 192.168.1.105 2055 interface GigabitEthernet0/1/0 ip address 192.168.1.1 255.255.255.0 ip access-group 102 in ip flow ingress ip flow egress ip nat inside ip inspect test out ip virtual-reassembly in negotiation auto no cdp enable I have tried quite a few things other than what you see above- I have tried it with and without NAT statements specifying the destination server and ports. I have tried it with and without ACL permits on the servers and ports. I have tried it with and without the inspect statements. The router changes I made were in the ACLs and Inspect statements which is why I tried all that. Any ideas? -------------------- m2f -------------------- Read this topic online here: http://forums.intermapper.com/viewtopic.php?p=4165#4165 ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
