You can install the latest firmware version (v5.06 currently) on the IOIO
v1 and you'll get OpenAccessory support.

On Tue, Jan 3, 2017 at 5:57 AM, Ian Forbes <[email protected]> wrote:

> Hi
>
> I have an old ioio V1 board that I connect to a Dell 5 PDA to run "XCSoar"
> software. The Dell runs Android version 2.2.2. It works very nicely.
>
> However the Dell is getting old and I am investigating replacing it with a
> new device. What I have discovered is that the newer Android versions don't
> support "USB Debugging" and I need to use OpenAccessory instead. My problem
> is that it seems my ioio card is too old to support OpenAccessory.
>
> I am not sure exactly what version my hardware and bios are, but the
> newest application firmware that I can install with the IOIOManager
> application is App-IOIO0300.ioioapp. (I can install Blink V1 and the LED
> starts blinking. Then I try and install successively older versions of the
> Application Firmware and only when I get back to this version does it load
> the firmware and stop led from blinking).
>
> I think it comes down to these two questions:
>
> Can my ioio V1 board be made to support "Openaccessory"?
>
> Do I have to get hold of a programmer device or another IOIO card to
> upgrade the BIOS in order to achieve this?
>
> Thanks
>
> Ian
>
> --
> You received this message because you are subscribed to the Google Groups
> "ioio-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at https://groups.google.com/group/ioio-users.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"ioio-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/ioio-users.
For more options, visit https://groups.google.com/d/optout.

Reply via email to