OK, I connected a push button switch between mclr and ground and it does the job after hitting it few times. It could be automated by using a small mc I guess.
On Sun, Feb 25, 2018 at 6:35 PM, kumarasamy parvathakannan < [email protected]> wrote: > Hi Pogono > > That is a great news, I am trying to implement a similar solution. > > I there any chance you can shed some light on the details? > > Thanks > Kannan > > On Sun, Feb 25, 2018 at 7:50 AM, pogono <[email protected]> wrote: > >> I have a stand alone machine with IOIO & Android 4. I had problem of IOIO >> usb is not functioning properly for a reason & then system is out of order. >> Sometimes resetting IOIO helps, sometimes needed more trials. But the >> problem took my time and spent gazoline. >> To solve my problem I designed a board which resets IOIO until USB works >> properly. I did not get any problem since then. >> >> >> <https://lh3.googleusercontent.com/-KM02tj65gqE/WpIdXMd6lVI/AAAAAAAAZ7c/aTGBlWVCTbgXCwbnBaNddrI_xDI4K01OgCLcBGAs/s1600/rsz_1rsz_120180225_045934.jpg> >> >> >> >> >> 19 Aralık 2017 Salı 06:25:05 UTC+3 tarihinde Maximillian yazdı: >> >>> HI Guys, >>> >>> I have some problem with IOIO. >>> >>> I use IOIO to control relay & read some input. >>> >>> Sometime I can use the IOIO normally for several transaction. >>> >>> When the day is over, I didn't turn off the IOIO (keep it powered) >>> >>> Randomly, the next day morning, the android can't detect the IOIO. >>> >>> Sometime I can make it work again by just turn off and on again the IOIO. >>> >>> But sometime it doesn't work and I don't know what to do. >>> >>> The behavior I notice is that when I plug the cable to the Android, it >>> doesn't automatically start my app. >>> >>> Usually in normal condition, the app start automatically when I plug the >>> cable.. >>> >>> Anybody has this issue? or have some workaround? >>> >>> Thanks. >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "ioio-users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at https://groups.google.com/group/ioio-users. >> For more options, visit https://groups.google.com/d/optout. >> > > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
