Hi Yijing,
        These devices don't support Phantom Function (PhantFunc 0).
Could you please help to provide full dmesg, /proc/iomem, and ACPI
DMAR table? You may get DMAR table by:
acpidump > acpi.bin
acpixtract -a acpib.bin
iasl -d DMAR.dat
Thanks!
Gerry

On 2014/8/11 11:46, Yijing Wang wrote:
> On 2014/8/11 11:15, Jiang Liu wrote:
>> Hi Yijing,
>>      Could you please help to provide detail information about the
>> PCI device, such as "lscpi -vvv"? It seems like that "Phantom
>> Functions" is enabled with these PCI devices.
>> Thanks!
>> Gerry
> 
> My pleasure!
> 
> Gerry, the lspci info is below:
> 
> HP C7000 Server:  The problem devices id: 04:00.4 04:00.5 04:00.6 04:00.7
> 
> 04:00.0 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) 
> (rev 01)
>       Subsystem: Hewlett-Packard Company Device 337b
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
> Stepping- SERR- FastB2B- DisINTx+
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0, Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 32
>       Region 0: Memory at ebff0000 (64-bit, non-prefetchable) [size=16K]
>       Region 2: Memory at ebfc0000 (64-bit, non-prefetchable) [size=128K]
>       Region 4: Memory at ebfa0000 (64-bit, non-prefetchable) [size=128K]
>       [virtual] Expansion ROM at dc000000 [disabled] [size=256K]
>       Capabilities: [40] Power Management version 3
>               Flags: PMEClk- DSI+ D1- D2- AuxCurrent=375mA 
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>       Capabilities: [48] MSI-X: Enable+ Count=32 Masked-
>               Vector table: BAR=0 offset=00002000
>               PBA: BAR=0 offset=00003000
>       Capabilities: [c0] Express (v2) Endpoint, MSI 00
>               DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 
> <16us
>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
>               DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ 
> Unsupported+
>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
>                       MaxPayload 256 bytes, MaxReadReq 4096 bytes
>               DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ 
> TransPend-
>               LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 
> <2us, L1 <16us
>                       ClockPM- Surprise- LLActRep- BwNot-
>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>               LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- 
> BWMgmt- ABWMgmt-
>               DevCap2: Completion Timeout: Not Supported, TimeoutDis-
>               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>               LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, 
> Selectable De-emphasis: -6dB
>                        Transmit Margin: Normal Operating Range, 
> EnterModifiedCompliance- ComplianceSOS-
>                        Compliance De-emphasis: -6dB
>               LnkSta2: Current De-emphasis Level: -3.5dB, 
> EqualizationComplete-, EqualizationPhase1-
>                        EqualizationPhase2-, EqualizationPhase3-, 
> LinkEqualizationRequest-
>       Capabilities: [b8] Vital Product Data
>               Product Name: 647586-B21, NIC PF
>               Read-only fields:
>                       [PN] Part number: 647584-001
>                       [SN] Serial number: H3534360ZX
>                       [V0] Vendor specific: VA00000000
>                       [EC] Engineering changes: A-5120
>                       [FN] Unknown: 36 34 39 39 34 30 2d 30 30 31 0d
>                       [VA] Vendor specific: 649940-001\x0d
>                       [VB] Vendor specific: PW=10W; PCIE X8 GEN 2
>                       [V1] Vendor specific: HP FlexFabric 10Gb 2-port 554FLB 
> Adapter
>                       [V2] Vendor specific: 554FLB
>                       [V4] Vendor specific: 0
>                       [V5] Vendor specific: OCl11102-F4-HP
>                       [V6] Vendor specific: A0:1,D0:1
>                       [RV] Reserved: checksum good, 42 byte(s) reserved
>               End
>       Capabilities: [100 v1] Advanced Error Reporting
>               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
> RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
>               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
> RxOF+ MalfTLP- ECRC- UnsupReq+ ACSViol-
>               UESvrt: DLP- SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>               AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>       Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
>               IOVCap: Migration-, Interrupt Message Number: 000
>               IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
>               IOVSta: Migration-
>               Initial VFs: 0, Total VFs: 0, Number of VFs: 0, Function 
> Dependency Link: 00
>               VF offset: 0, stride: 1, Device ID: 0710
>               Supported Page Size: 00000557, System Page Size: 00000001
>               Region 0: Memory at 0000000000000000 (64-bit, non-prefetchable)
>               VF Migration: offset: 00000000, BIR: 0
>       Capabilities: [160 v1] Alternative Routing-ID Interpretation (ARI)
>               ARICap: MFVC- ACS-, Next Function: 1
>               ARICtl: MFVC- ACS-, Function Group: 0
>       Capabilities: [168 v1] Device Serial Number f0-92-1c-ff-fe-16-8d-48
>       Capabilities: [12c v1] Transaction Processing Hints
>               No steering table available
>       Kernel driver in use: be2net
>       Kernel modules: be2net
> 
> 04:00.1 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) 
> (rev 01)
>       Subsystem: Hewlett-Packard Company Device 337b
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
> Stepping- SERR- FastB2B- DisINTx+
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0, Cache Line Size: 64 bytes
>       Interrupt: pin B routed to IRQ 36
>       Region 0: Memory at ebf90000 (64-bit, non-prefetchable) [size=16K]
>       Region 2: Memory at ebf60000 (64-bit, non-prefetchable) [size=128K]
>       Region 4: Memory at ebf40000 (64-bit, non-prefetchable) [size=128K]
>       [virtual] Expansion ROM at dc040000 [disabled] [size=256K]
>       Capabilities: [40] Power Management version 3
>               Flags: PMEClk- DSI+ D1- D2- AuxCurrent=375mA 
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>       Capabilities: [48] MSI-X: Enable+ Count=32 Masked-
>               Vector table: BAR=0 offset=00002000
>               PBA: BAR=0 offset=00003000
>       Capabilities: [c0] Express (v2) Endpoint, MSI 00
>               DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 
> <16us
>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
>               DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ 
> Unsupported+
>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
>                       MaxPayload 256 bytes, MaxReadReq 4096 bytes
>               DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ 
> TransPend-
>               LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 
> <2us, L1 <16us
>                       ClockPM- Surprise- LLActRep- BwNot-
>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>               LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- 
> BWMgmt- ABWMgmt-
>               DevCap2: Completion Timeout: Not Supported, TimeoutDis-
>               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- 
> SpeedDis-, Selectable De-emphasis: -6dB
>                        Transmit Margin: Normal Operating Range, 
> EnterModifiedCompliance- ComplianceSOS-
>                        Compliance De-emphasis: -6dB
>               LnkSta2: Current De-emphasis Level: -3.5dB, 
> EqualizationComplete-, EqualizationPhase1-
>                        EqualizationPhase2-, EqualizationPhase3-, 
> LinkEqualizationRequest-
>       Capabilities: [b8] Vital Product Data
>               Product Name: 647586-B21, NIC PF
>               Read-only fields:
>                       [PN] Part number: 647584-001
>                       [SN] Serial number: H3534360ZX
>                       [V0] Vendor specific: VA00000000
>                       [EC] Engineering changes: A-5120
>                       [FN] Unknown: 36 34 39 39 34 30 2d 30 30 31 0d
>                       [VA] Vendor specific: 649940-001\x0d
>                       [VB] Vendor specific: PW=10W; PCIE X8 GEN 2
>                       [V1] Vendor specific: HP FlexFabric 10Gb 2-port 554FLB 
> Adapter
>                       [V2] Vendor specific: 554FLB
>                       [V4] Vendor specific: 1
>                       [V5] Vendor specific: OCl11102-F4-HP
>                       [V6] Vendor specific: A0:1,D0:1
>                       [RV] Reserved: checksum good, 42 byte(s) reserved
>               End
>       Capabilities: [100 v1] Advanced Error Reporting
>               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
> RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
>               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
> RxOF+ MalfTLP- ECRC- UnsupReq+ ACSViol-
>               UESvrt: DLP- SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>               AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>       Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
>               IOVCap: Migration-, Interrupt Message Number: 000
>               IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy-
>               IOVSta: Migration-
>               Initial VFs: 0, Total VFs: 0, Number of VFs: 0, Function 
> Dependency Link: 01
>               VF offset: 0, stride: 1, Device ID: 0710
>               Supported Page Size: 00000557, System Page Size: 00000001
>               Region 0: Memory at 0000000000000000 (64-bit, non-prefetchable)
>               VF Migration: offset: 00000000, BIR: 0
>       Capabilities: [160 v1] Alternative Routing-ID Interpretation (ARI)
>               ARICap: MFVC- ACS-, Next Function: 2
>               ARICtl: MFVC- ACS-, Function Group: 0
>       Capabilities: [168 v1] Device Serial Number f0-92-1c-ff-fe-16-8d-48
>       Capabilities: [12c v1] Transaction Processing Hints
>               No steering table available
>       Kernel driver in use: be2net
>       Kernel modules: be2net
> 
> 04:00.2 Mass storage controller: Emulex Corporation OneConnect 10Gb iSCSI 
> Initiator (be3) (rev 01)
>       Subsystem: Hewlett-Packard Company Device 337b
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0, Cache Line Size: 64 bytes
>       Interrupt: pin C routed to IRQ 37
>       Region 0: Memory at ebf30000 (64-bit, non-prefetchable) [size=16K]
>       Region 2: Memory at ebf00000 (64-bit, non-prefetchable) [size=128K]
>       Region 4: Memory at ebee0000 (64-bit, non-prefetchable) [size=128K]
>       [virtual] Expansion ROM at dc080000 [disabled] [size=256K]
>       Capabilities: [40] Power Management version 3
>               Flags: PMEClk- DSI+ D1- D2- AuxCurrent=375mA 
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>       Capabilities: [48] MSI-X: Enable- Count=8 Masked-
>               Vector table: BAR=0 offset=00002000
>               PBA: BAR=0 offset=00003000
>       Capabilities: [c0] Express (v2) Endpoint, MSI 00
>               DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 
> <16us
>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
>               DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ 
> Unsupported-
>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
>                       MaxPayload 256 bytes, MaxReadReq 4096 bytes
>               DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ 
> TransPend-
>               LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 
> <2us, L1 <16us
>                       ClockPM- Surprise- LLActRep- BwNot-
>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>               LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- 
> BWMgmt- ABWMgmt-
>               DevCap2: Completion Timeout: Not Supported, TimeoutDis-
>               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- 
> SpeedDis-, Selectable De-emphasis: -6dB
>                        Transmit Margin: Normal Operating Range, 
> EnterModifiedCompliance- ComplianceSOS-
>                        Compliance De-emphasis: -6dB
>               LnkSta2: Current De-emphasis Level: -3.5dB, 
> EqualizationComplete-, EqualizationPhase1-
>                        EqualizationPhase2-, EqualizationPhase3-, 
> LinkEqualizationRequest-
>       Capabilities: [b8] Vital Product Data
>               Product Name: 647586-B21, iSCSI PF
>               Read-only fields:
>                       [PN] Part number: 647584-001
>                       [SN] Serial number: H3534360ZX
>                       [V0] Vendor specific: VA00000000
>                       [EC] Engineering changes: A-5120
>                       [FN] Unknown: 36 34 39 39 34 30 2d 30 30 31 0d
>                       [VA] Vendor specific: 649940-001\x0d
>                       [VB] Vendor specific: PW=10W; PCIE X8 GEN 2
>                       [V1] Vendor specific: HP FlexFabric 10Gb 2-port 554FLB 
> Adapter
>                       [V2] Vendor specific: 554FLB
>                       [V4] Vendor specific: 0
>                       [V5] Vendor specific: OCl11102-F4-HP
>                       [V6] Vendor specific: A0:1,D0:1
>                       [RV] Reserved: checksum good, 40 byte(s) reserved
>               End
>       Capabilities: [100 v1] Advanced Error Reporting
>               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
> RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
>               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
> RxOF+ MalfTLP- ECRC- UnsupReq+ ACSViol-
>               UESvrt: DLP- SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>               AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>       Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
>               IOVCap: Migration-, Interrupt Message Number: 000
>               IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy-
>               IOVSta: Migration-
>               Initial VFs: 0, Total VFs: 0, Number of VFs: 0, Function 
> Dependency Link: 02
>               VF offset: 0, stride: 1, Device ID: 0712
>               Supported Page Size: 00000557, System Page Size: 00000001
>               Region 0: Memory at 0000000000000000 (64-bit, non-prefetchable)
>               VF Migration: offset: 00000000, BIR: 0
>       Capabilities: [160 v1] Alternative Routing-ID Interpretation (ARI)
>               ARICap: MFVC- ACS-, Next Function: 3
>               ARICtl: MFVC- ACS-, Function Group: 0
>       Capabilities: [168 v1] Device Serial Number f0-92-1c-ff-fe-16-8d-48
>       Capabilities: [12c v1] Transaction Processing Hints
>               No steering table available
>       Kernel driver in use: be2iscsi
>       Kernel modules: be2iscsi
> 
> 04:00.3 Mass storage controller: Emulex Corporation OneConnect 10Gb iSCSI 
> Initiator (be3) (rev 01)
>       Subsystem: Hewlett-Packard Company Device 337b
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0, Cache Line Size: 64 bytes
>       Interrupt: pin D routed to IRQ 38
>       Region 0: Memory at ebed0000 (64-bit, non-prefetchable) [size=16K]
>       Region 2: Memory at ebea0000 (64-bit, non-prefetchable) [size=128K]
>       Region 4: Memory at ebe80000 (64-bit, non-prefetchable) [size=128K]
>       [virtual] Expansion ROM at dc0c0000 [disabled] [size=256K]
>       Capabilities: [40] Power Management version 3
>               Flags: PMEClk- DSI+ D1- D2- AuxCurrent=375mA 
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>       Capabilities: [48] MSI-X: Enable- Count=8 Masked-
>               Vector table: BAR=0 offset=00002000
>               PBA: BAR=0 offset=00003000
>       Capabilities: [c0] Express (v2) Endpoint, MSI 00
>               DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 
> <16us
>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
>               DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ 
> Unsupported-
>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
>                       MaxPayload 256 bytes, MaxReadReq 4096 bytes
>               DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ 
> TransPend-
>               LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 
> <2us, L1 <16us
>                       ClockPM- Surprise- LLActRep- BwNot-
>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>               LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- 
> BWMgmt- ABWMgmt-
>               DevCap2: Completion Timeout: Not Supported, TimeoutDis-
>               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- 
> SpeedDis-, Selectable De-emphasis: -6dB
>                        Transmit Margin: Normal Operating Range, 
> EnterModifiedCompliance- ComplianceSOS-
>                        Compliance De-emphasis: -6dB
>               LnkSta2: Current De-emphasis Level: -3.5dB, 
> EqualizationComplete-, EqualizationPhase1-
>                        EqualizationPhase2-, EqualizationPhase3-, 
> LinkEqualizationRequest-
>       Capabilities: [b8] Vital Product Data
>               Product Name: 647586-B21, iSCSI PF
>               Read-only fields:
>                       [PN] Part number: 647584-001
>                       [SN] Serial number: H3534360ZX
>                       [V0] Vendor specific: VA00000000
>                       [EC] Engineering changes: A-5120
>                       [FN] Unknown: 36 34 39 39 34 30 2d 30 30 31 0d
>                       [VA] Vendor specific: 649940-001\x0d
>                       [VB] Vendor specific: PW=10W; PCIE X8 GEN 2
>                       [V1] Vendor specific: HP FlexFabric 10Gb 2-port 554FLB 
> Adapter
>                       [V2] Vendor specific: 554FLB
>                       [V4] Vendor specific: 1
>                       [V5] Vendor specific: OCl11102-F4-HP
>                       [V6] Vendor specific: A0:1,D0:1
>                       [RV] Reserved: checksum good, 40 byte(s) reserved
>               End
>       Capabilities: [100 v1] Advanced Error Reporting
>               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
> RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
>               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
> RxOF+ MalfTLP- ECRC- UnsupReq+ ACSViol-
>               UESvrt: DLP- SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>               AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>       Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
>               IOVCap: Migration-, Interrupt Message Number: 000
>               IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy-
>               IOVSta: Migration-
>               Initial VFs: 0, Total VFs: 0, Number of VFs: 0, Function 
> Dependency Link: 03
>               VF offset: 0, stride: 1, Device ID: 0712
>               Supported Page Size: 00000557, System Page Size: 00000001
>               Region 0: Memory at 0000000000000000 (64-bit, non-prefetchable)
>               VF Migration: offset: 00000000, BIR: 0
>       Capabilities: [160 v1] Alternative Routing-ID Interpretation (ARI)
>               ARICap: MFVC- ACS-, Next Function: 0
>               ARICtl: MFVC- ACS-, Function Group: 0
>       Capabilities: [168 v1] Device Serial Number f0-92-1c-ff-fe-16-8d-48
>       Capabilities: [12c v1] Transaction Processing Hints
>               No steering table available
>       Kernel driver in use: be2iscsi
>       Kernel modules: be2iscsi
> 
> Huawei Storage Server: devices id: 03:07.1 03:07.2 03:07.3
> 
> 03:00.0 Bridge: PLX Technology, Inc. Device 8725 (rev ca)
>       Subsystem: PLX Technology, Inc. Device 87b0
>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
> Stepping- SERR+ FastB2B- DisINTx+
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0, Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 94
>       Region 0: Memory at 94100000 (32-bit, non-prefetchable) [size=256K]
>       Region 2: Memory at 180000000000 (64-bit, prefetchable) [size=4T]
>       Region 4: Memory at 90000000 (32-bit, non-prefetchable) [size=64M]
>       Region 5: Memory at 94000000 (32-bit, non-prefetchable) [size=1M]
>       Capabilities: [40] Power Management version 3
>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>       Capabilities: [48] MSI: Enable+ Count=1/8 Maskable+ 64bit+
>               Address: 00000000fee00000  Data: 4063
>               Masking: 000000fe  Pending: 00000000
>       Capabilities: [68] Express (v2) Endpoint, MSI 00
>               DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s 
> unlimited, L1 unlimited
>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>               DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ 
> Unsupported+
>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                       MaxPayload 256 bytes, MaxReadReq 128 bytes
>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
> TransPend-
>               LnkCap: Port #1, Speed 8GT/s, Width x8, ASPM L0s L1, Latency L0 
> <2us, L1 <4us
>                       ClockPM- Surprise- LLActRep- BwNot-
>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>               LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk- DLActive- 
> BWMgmt- ABWMgmt-
>               DevCap2: Completion Timeout: Not Supported, TimeoutDis-
>               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>               LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-, 
> Selectable De-emphasis: -6dB
>                        Transmit Margin: Normal Operating Range, 
> EnterModifiedCompliance- ComplianceSOS-
>                        Compliance De-emphasis: -6dB
>               LnkSta2: Current De-emphasis Level: -6dB, 
> EqualizationComplete-, EqualizationPhase1-
>                        EqualizationPhase2-, EqualizationPhase3-, 
> LinkEqualizationRequest-
>       Capabilities: [c8] Vendor Specific Information: Len=00 <?>
>       Capabilities: [100 v1] Device Serial Number ca-87-00-10-b5-df-0e-00
>       Capabilities: [fb4 v1] Advanced Error Reporting
>               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>               UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
> RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>               AERCap: First Error Pointer: 1f, GenCap+ CGenEn- ChkCap+ ChkEn-
>       Capabilities: [148 v1] Virtual Channel
>               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
>               Arb:    Fixed- WRR32- WRR64- WRR128-
>               Ctrl:   ArbSelect=Fixed
>               Status: InProgress-
>               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>                       Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>                       Status: NegoPending- InProgress-
>       Capabilities: [c34 v1] Vendor Specific Information: ID=0003 Rev=0 
> Len=078 <?>
>       Capabilities: [b70 v1] Vendor Specific Information: ID=0001 Rev=0 
> Len=010 <?>
> 
> Thanks!
> Yijing.
> 
> 
>>
>> On 2014/8/11 10:54, Yijing Wang wrote:
>>> We found some strange devices in HP C7000 and Huawei Server. These devices
>>> can not be enumerated by OS, but they still did DMA read/write without OS 
>>> management. Because iommu will not create the DMA mapping for these devices,
>>> the DMA read/write will be blocked by iommu hardware.
>>>
>>> Eg.
>>>  \-[0000:00]-+-00.0  Intel Corporation Xeon E5/Core i7 DMI2
>>>              +-01.0-[11]--
>>>                      +-01.1-[02]--
>>>                      +-02.0-[04]--+-00.0  Emulex Corporation OneConnect 
>>> 10Gb NIC (be3)
>>>              |            +-00.1  Emulex Corporation OneConnect 10Gb NIC 
>>> (be3)
>>>              |            +-00.2  Emulex Corporation OneConnect 10Gb iSCSI 
>>> Initiator (be3)
>>>              |            \-00.3  Emulex Corporation OneConnect 10Gb iSCSI 
>>> Initiator (be3)
>>>              +-02.1-[12]--
>>> Kernel only found four devices in bus 0x04, but we found following DMA 
>>> errors in dmesg.
>>>
>>> [ 1438.477262] DRHD: handling fault status reg 402
>>> [ 1438.498278] DMAR:[DMA Write] Request device [04:00.4] fault addr 
>>> bdf70000 
>>> [ 1438.498280] DMAR:[fault reason 02] Present bit in context entry is clear
>>> [ 1438.566458] DMAR:[DMA Write] Request device [04:00.5] fault addr 
>>> bdf70000 
>>> [ 1438.566460] DMAR:[fault reason 02] Present bit in context entry is clear
>>> [ 1438.635211] DMAR:[DMA Write] Request device [04:00.6] fault addr 
>>> bdf70000 
>>> [ 1438.635213] DMAR:[fault reason 02] Present bit in context entry is clear
>>> [ 1438.703849] DMAR:[DMA Write] Request device [04:00.7] fault addr 
>>> bdf70000 
>>> [ 1438.703851] DMAR:[fault reason 02] Present bit in context entry is clear
>>>
>>> Signed-off-by: Yijing Wang <wangyij...@huawei.com>
>>> ---
>>>  arch/x86/include/asm/iommu.h |    2 ++
>>>  arch/x86/kernel/pci-dma.c    |    8 ++++++++
>>>  drivers/iommu/intel-iommu.c  |   41 
>>> +++++++++++++++++++++++++++++++++++++++++
>>>  3 files changed, 51 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/arch/x86/include/asm/iommu.h b/arch/x86/include/asm/iommu.h
>>> index 345c99c..5e3a2d8 100644
>>> --- a/arch/x86/include/asm/iommu.h
>>> +++ b/arch/x86/include/asm/iommu.h
>>> @@ -5,6 +5,8 @@ extern struct dma_map_ops nommu_dma_ops;
>>>  extern int force_iommu, no_iommu;
>>>  extern int iommu_detected;
>>>  extern int iommu_pass_through;
>>> +extern int iommu_pt_force_bus;
>>> +extern int iommu_pt_force_domain;
>>>  
>>>  /* 10 seconds */
>>>  #define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000)
>>> diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
>>> index a25e202..bf21d97 100644
>>> --- a/arch/x86/kernel/pci-dma.c
>>> +++ b/arch/x86/kernel/pci-dma.c
>>> @@ -44,6 +44,8 @@ int iommu_detected __read_mostly = 0;
>>>   * guests and not for driver dma translation.
>>>   */
>>>  int iommu_pass_through __read_mostly;
>>> +int iommu_pt_force_bus = -1;
>>> +int iommu_pt_force_domain = -1;
>>>  
>>>  extern struct iommu_table_entry __iommu_table[], __iommu_table_end[];
>>>  
>>> @@ -146,6 +148,7 @@ void dma_generic_free_coherent(struct device *dev, 
>>> size_t size, void *vaddr,
>>>   */
>>>  static __init int iommu_setup(char *p)
>>>  {
>>> +   char *end;
>>>     iommu_merge = 1;
>>>  
>>>     if (!p)
>>> @@ -192,6 +195,11 @@ static __init int iommu_setup(char *p)
>>>  #endif
>>>             if (!strncmp(p, "pt", 2))
>>>                     iommu_pass_through = 1;
>>> +           if (!strncmp(p, "pt_force=", 9)) {
>>> +                   iommu_pass_through = 1;
>>> +                   iommu_pt_force_domain = simple_strtol(p+9, &end, 0);
>>> +                   iommu_pt_force_bus = simple_strtol(end+1, NULL, 0);
>>> +           }
>>>  
>>>             gart_parse_options(p);
>>>  
>>> diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
>>> index d1f5caa..49757f1 100644
>>> --- a/drivers/iommu/intel-iommu.c
>>> +++ b/drivers/iommu/intel-iommu.c
>>> @@ -2705,6 +2705,47 @@ static int __init 
>>> iommu_prepare_static_identity_mapping(int hw)
>>>                             return ret;
>>>             }
>>>  
>>> +   /* We found some strange devices in HP c7000 and other platforms that
>>> +    * can not be enumerated by OS, but they did DMA read/write without
>>> +    * driver management, so we should create the pt mapping for these
>>> +    * devices to avoid DMA errors. Add iommu=pt_force=segment:busnum to
>>> +    * force to do pt context mapping in the bus number.
>>> +    */
>>> +   if (iommu_pt_force_bus >= 0 && iommu_pt_force_bus >= 0) {
>>> +           int found = 0;
>>> +
>>> +           iommu = NULL;
>>> +           for_each_active_iommu(iommu, drhd) {
>>> +                   if (iommu_pt_force_domain != drhd->segment)
>>> +                           continue;
>>> +
>>> +                   for_each_active_dev_scope(drhd->devices, 
>>> drhd->devices_cnt, i, dev) {
>>> +                           if (!dev_is_pci(dev))
>>> +                                   continue;
>>> +
>>> +                           pdev = to_pci_dev(dev);
>>> +                           if (pdev->bus->number == iommu_pt_force_bus ||
>>> +                                           (pdev->subordinate
>>> +                                            && pdev->subordinate->number 
>>> <= iommu_pt_force_bus
>>> +                                            && 
>>> pdev->subordinate->busn_res.end >= iommu_pt_force_bus)) {
>>> +                                   found = 1;
>>> +                                   break;
>>> +                           }
>>> +                   }
>>> +
>>> +                   if (drhd->include_all) {
>>> +                           found = 1;
>>> +                           break;
>>> +                   }
>>> +           }
>>> +
>>> +           if (found && iommu)
>>> +                   for (i = 0; i < 256; i++)
>>> +                           domain_context_mapping_one(si_domain, iommu, 
>>> iommu_pt_force_bus,
>>> +                                           i,  hw ? 
>>> CONTEXT_TT_PASS_THROUGH :
>>> +                                           CONTEXT_TT_MULTI_LEVEL);
>>> +   }
>>> +
>>>     return 0;
>>>  }
>>>  
>>>
>>
>> .
>>
> 
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Reply via email to