Hi Alex,
On 05/10/2016 12:49 AM, Alex Williamson wrote:
> On Wed, 4 May 2016 11:54:16 +0000
> Eric Auger <eric.au...@linaro.org> wrote:
>
>> On x86 IRQ remapping is abstracted by the IOMMU. On ARM this is abstracted
>> by the msi controller. vfio_safe_irq_domain allows to check whether
>> interrupts are "safe" for a given device. They are if the device does
>> not use MSI
>
> Are we sure we're not opening a security hole here? An MSI is simply a
> DMA write, so really whether or not a device uses MSI is irrelevant.
> If it can generate a DMA to the MSI doorbell then we need to be
> protected and I think we pretty much need to assume that devices are
> DMA capable. Do the MSI domain checks cover this?
Let me try to rephrase: we check the device is not attached to an MSI
controller (I think this is the semantic of dev_get_msi_domain(dev)).
If it is not, we don't have to care about MSI isolation: there will be
no IOMMU binding between the device and any MSI doorbell. If it is we
check the msi domain is backed by an MSI controller able to perform MSI
isolation.
So effectively "usage of MSIs" is improper - since it is decided after
the group attachment anyway - and the commit message should rather
state "if the device is linked to an MSI controller" (dt msi-parent
notion I think).
Does it sound better?
Regards
Eric
>
>> or if the device uses MSI and the msi-parent controller
>> supports IRQ remapping.
>>
>> Then we check at group level if all devices have safe interrupts: if not,
>> we only allow the group to be attached if allow_unsafe_interrupts is set.
>>
>> At this point ARM sMMU still advertises IOMMU_CAP_INTR_REMAP. This is
>> changed in next patch.
>>
>> Signed-off-by: Eric Auger <eric.au...@linaro.org>
>>
>> ---
>> v3 -> v4:
>> - rename vfio_msi_parent_irq_remapping_capable into vfio_safe_irq_domain
>> and irq_remapping into safe_irq_domains
>>
>> v2 -> v3:
>> - protect vfio_msi_parent_irq_remapping_capable with
>> CONFIG_GENERIC_MSI_IRQ_DOMAIN
>> ---
>> drivers/vfio/vfio_iommu_type1.c | 44
>> +++++++++++++++++++++++++++++++++++++++--
>> 1 file changed, 42 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/vfio/vfio_iommu_type1.c
>> b/drivers/vfio/vfio_iommu_type1.c
>> index 4d3a6f1..2fc8197 100644
>> --- a/drivers/vfio/vfio_iommu_type1.c
>> +++ b/drivers/vfio/vfio_iommu_type1.c
>> @@ -37,6 +37,8 @@
>> #include <linux/vfio.h>
>> #include <linux/workqueue.h>
>> #include <linux/msi-iommu.h>
>> +#include <linux/irqdomain.h>
>> +#include <linux/msi.h>
>>
>> #define DRIVER_VERSION "0.2"
>> #define DRIVER_AUTHOR "Alex Williamson <alex.william...@redhat.com>"
>> @@ -777,6 +779,33 @@ static int vfio_bus_type(struct device *dev, void *data)
>> return 0;
>> }
>>
>> +/**
>> + * vfio_safe_irq_domain: returns whether the irq domain
>> + * the device is attached to is safe with respect to MSI isolation.
>> + * If the irq domain is not an MSI domain, we return it is safe.
>> + *
>> + * @dev: device handle
>> + * @data: unused
>> + * returns 0 if the irq domain is safe, -1 if not.
>> + */
>> +static int vfio_safe_irq_domain(struct device *dev, void *data)
>> +{
>> +#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
>> + struct irq_domain *domain;
>> + struct msi_domain_info *info;
>> +
>> + domain = dev_get_msi_domain(dev);
>> + if (!domain)
>> + return 0;
>> +
>> + info = msi_get_domain_info(domain);
>> +
>> + if (!(info->flags & MSI_FLAG_IRQ_REMAPPING))
>> + return -1;
>> +#endif
>> + return 0;
>> +}
>> +
>> static int vfio_iommu_replay(struct vfio_iommu *iommu,
>> struct vfio_domain *domain)
>> {
>> @@ -870,7 +899,7 @@ static int vfio_iommu_type1_attach_group(void
>> *iommu_data,
>> struct vfio_group *group, *g;
>> struct vfio_domain *domain, *d;
>> struct bus_type *bus = NULL;
>> - int ret;
>> + int ret, safe_irq_domains;
>>
>> mutex_lock(&iommu->lock);
>>
>> @@ -893,6 +922,13 @@ static int vfio_iommu_type1_attach_group(void
>> *iommu_data,
>>
>> group->iommu_group = iommu_group;
>>
>> + /*
>> + * Determine if all the devices of the group have a safe irq domain
>> + * with respect to MSI isolation
>> + */
>> + safe_irq_domains = !iommu_group_for_each_dev(iommu_group, &bus,
>> + vfio_safe_irq_domain);
>> +
>> /* Determine bus_type in order to allocate a domain */
>> ret = iommu_group_for_each_dev(iommu_group, &bus, vfio_bus_type);
>> if (ret)
>> @@ -920,8 +956,12 @@ static int vfio_iommu_type1_attach_group(void
>> *iommu_data,
>> INIT_LIST_HEAD(&domain->group_list);
>> list_add(&group->next, &domain->group_list);
>>
>> + /*
>> + * to advertise safe interrupts either the IOMMU or the MSI controllers
>> + * must support IRQ remapping/interrupt translation
>> + */
>> if (!allow_unsafe_interrupts &&
>> - !iommu_capable(bus, IOMMU_CAP_INTR_REMAP)) {
>> + (!iommu_capable(bus, IOMMU_CAP_INTR_REMAP) && !safe_irq_domains)) {
>> pr_warn("%s: No interrupt remapping support. Use the module
>> param \"allow_unsafe_interrupts\" to enable VFIO IOMMU support on this
>> platform\n",
>> __func__);
>> ret = -EPERM;
>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
