On Wed, Mar 01, 2017 at 12:42:52PM -0500, Rob Clark wrote:

Nit: use "dt-bindings: iommu: ..." for subject. And a commit message 
would be nice.

> Cc: devicet...@vger.kernel.org
> Signed-off-by: Rob Clark <robdcl...@gmail.com>
> ---
>  .../devicetree/bindings/iommu/qcom,iommu.txt       | 106 
> +++++++++++++++++++++
>  1 file changed, 106 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iommu/qcom,iommu.txt
> 
> diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt 
> b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt
> new file mode 100644
> index 0000000..2e69b78
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt
> @@ -0,0 +1,106 @@
> +* QCOM IOMMU v1 Implementation
> +
> +Qualcomm "B" family devices which are not compatible with arm-smmu have
> +a similar looking IOMMU but without access to the global register space,
> +and optionally requiring additional configuration to route context irqs
> +to non-secure vs secure interrupt line.
> +
> +** Required properties:
> +
> +- compatible       : Should be "qcom,msm-iommu-v1".

Fine as a fallback, but this needs chip specific compatibles.

> +- clocks           : The interface clock (iface_clk) and bus clock (bus_clk).

The names need to be documented under clock-names prop.

'_clk' is redundant.

> +- #address-cells   : must be 1.
> +- #size-cells      : must be 1.
> +- #iommu-cells     : Must be 1.
> +- ranges           : Base address and size of the iommu context banks.
> +- qcom,iommu-secure-id  : secure-id.
> +
> +- List of sub-nodes, one per translation context bank.  Each sub-node
> +  has the following required properties:
> +
> +  - compatible     : Should be one of:
> +        - "qcom,msm-iommu-v1-ns"  : non-secure context bank
> +        - "qcom,msm-iommu-v1-sec" : secure context bank

These are okay without chip specific strings.

> +  - reg            : Base address and size of context bank within the iommu
> +  - interrupts     : The context fault irq.
> +
> +** Optional properties:
> +
> +- reg              : Base address and size of the SMMU local base, should
> +                     be only specified if the iommu requires configuration
> +                     for routing of context bank irq's to secure vs non-
> +                     secure lines.  (Ie. if the iommu contains secure
> +                     context banks)
> +
> +
> +** Examples:
> +
> +     apps_iommu: msm-iommu-v1@1e20000 {

iommu@...

And this should be the reg address, not the ranges address.

> +             #address-cells = <1>;
> +             #size-cells = <1>;
> +             #iommu-cells = <1>;
> +             compatible = "qcom,msm-iommu-v1";
> +             ranges = <0 0x1e20000 0x40000>;
> +             reg = <0x1ef0000 0x3000>;
> +             clocks = <&gcc GCC_SMMU_CFG_CLK>,
> +                      <&gcc GCC_APSS_TCU_CLK>;
> +             clock-names = "iface_clk", "bus_clk";
> +             qcom,iommu-secure-id = <17>;
> +
> +             // mdp_0:
> +             msm-iommu-v1-ctx@4000 {

iommu@...

> +                     compatible = "qcom,msm-iommu-v1-ns";
> +                     reg = <0x4000 0x1000>;
> +                     interrupts = <GIC_SPI 70 0>;
> +             };
> +
> +             // venus_ns:
> +             msm-iommu-v1-ctx@5000 {
> +                     compatible = "qcom,msm-iommu-v1-sec";
> +                     reg = <0x5000 0x1000>;
> +                     interrupts = <GIC_SPI 70 0>;
> +             };
> +     };
> +
> +     gpu_iommu: msm-iommu-v1@1f08000 {

ditto.

> +             #address-cells = <1>;
> +             #size-cells = <1>;
> +             #iommu-cells = <1>;
> +             compatible = "qcom,msm-iommu-v1";
> +             ranges = <0 0x1f08000 0x10000>;
> +             clocks = <&gcc GCC_SMMU_CFG_CLK>,
> +                      <&gcc GCC_GFX_TCU_CLK>;
> +             clock-names = "iface_clk", "bus_clk";
> +             qcom,iommu-secure-id = <18>;
> +
> +             // gfx3d_user:
> +             msm-iommu-v1-ctx@1f09000 {
> +                     compatible = "qcom,msm-iommu-v1-ns";
> +                     reg = <0x1000 0x1000>;
> +                     interrupts = <GIC_SPI 241 0>;
> +             };
> +
> +             // gfx3d_priv:
> +             msm-iommu-v1-ctx@1f0a000 {
> +                     compatible = "qcom,msm-iommu-v1-ns";
> +                     reg = <0x2000 0x1000>;
> +                     interrupts = <GIC_SPI 242 0>;
> +             };
> +     };
> +
> +     ...
> +
> +     venus: video-codec@1d00000 {
> +             ...
> +             iommus = <&apps_iommu 5>;
> +     };
> +
> +     mdp: mdp@1a01000 {
> +             ...
> +             iommus = <&apps_iommu 4>;
> +     };
> +
> +     gpu@01c00000 {
> +             ...
> +             iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
> +     };
> -- 
> 2.9.3
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Reply via email to