Hi All, I'm writing to check with you to see if the latest arm-smmu.c driver in v4.12-rc Linux for smmu-500 can support mapping that is only specific to a particular physical address range while leave the rest still to be handled by the client device. I believe this can already be supported by the device tree binding of the generic IOMMU framework; however, it is not clear to me whether or not the arm-smmu.c driver can support it.
To give you some background information: We have a SoC that has PCIe root complex that has a build-in logic block to forward MSI writes to ARM GICv3 ITS. Unfortunately, this logic block has a HW bug that causes the MSI writes not parsed properly and can potentially corrupt data in the internal FIFO. A workaround is to have ARM MMU-500 takes care of all inbound transactions. I found that is working after hooking up our PCIe root complex to MMU-500; however, even with this optimized arm-smmu driver in v4.12, I'm still seeing a significant Ethernet throughput drop in both the TX and RX directions. The throughput drop is very significant at around 50% (but is already much improved compared to other prior kernel versions at 70~90%). One alternative is to only use MMU-500 for MSI writes towards GITS_TRANSLATER register in the GICv3, i.e., if I can define a specific region of physical address that I want MMU-500 to act on and leave the rest of inbound transactions to be handled directly by our PCIe controller, it can potentially work around the HW bug we have and at the same time achieve optimal throughput. Any feedback from you is greatly appreciated! Best regards, Ray _______________________________________________ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu