On Sat, Jun 24, 2017 at 9:35 AM, Christoph Hellwig <h...@lst.de> wrote: > I always assumed that our streaming mappings are relaxed order for > TLP anyway. And at very least Documentation/DMA-attributes.txt seems > to imply something different: > > > DMA_ATTR_WEAK_ORDERING > ---------------------- > > DMA_ATTR_WEAK_ORDERING specifies that reads and writes to the mapping > may be weakly ordered, that is that reads and writes may pass each other. > > Which to me suggest host reads, which also makes me wonder why these > would even apply to our streaming mappings. > > Adding the powerpc folks that added the DMA_ATTR_WEAK_ORDERING flag > originally back in 2008, but not actual users as far as I can tell - > those are all new and from the sparc gang, except for the noveau > driver, which is a bit older but only uses for dma_alloc_attrs, where > the original description makes sense to me.
I suspect people have applied the same name for different things over time. When we added it in 2008, there was one specific use case, improving throughput on infiniband, iirc using the mthca device driver. In the Cell IOMMU, this attribute causes concurrent DMA transfers on PCIe devices to disregard the stricter PCI ordering rules: multiple transfers could be initiated together and complete in an arbitrary order depending on e.g. I/O page faults in the IOMMU. Using the dma attributes, this could be controlled to apply only to certain transfers, so a completion queue DMA would still be ordered with regard to other transfers, as it would not come with that attribute. There are two things that I don't remember unfortunately. a) why this patch seems to have never made it into the mainline kernel: http://lists.openfabrics.org/pipermail/general/2008-October/055006.html We probably had it added to both OFED and the supported distros at the time (RHEL, Fedora, SLES, all in versions I don't remember any more) b) How this relates to the PCIe relaxed ordering flag on DMA transfers. It's possible that the hardware later learned to correctly set the flag on the actual transfer to have the same effect, or it's possible that we had to add the dma_alloc_attr() interface specifically because the hardware could not do this for some but not other transfers. Arnd _______________________________________________ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu