Hi Alex,
On 20/11/17 22:01, Alex Williamson wrote:
On Mon, 20 Nov 2017 14:25:14 +0000
Liviu Dudau <liviu.du...@arm.com> wrote:
On Fri, Oct 13, 2017 at 04:48:45PM +0100, Robin Murphy wrote:
Hi Joerg,
Hi,
On 20/09/17 15:13, Liviu Dudau wrote:
If the IPMMU driver is compiled in the kernel it will replace the
platform bus IOMMU ops on running the ipmmu_init() function, regardless
if there is any IPMMU hardware present or not. This screws up systems
that just want to build a generic kernel that runs on multiple platforms
and use a different IOMMU implementation.
Move the bus_set_iommu() call at the end of the ipmmu_probe() function
when we know that hardware is present. With current IOMMU framework it
should be safe (at least for OF case).
Now that the ipmmu_init() and ipmmu_exit() functions are simple calls to
platform_driver_register() and platform_driver_unregister(), replace
them with the module_platform_driver() macro call.
Are you OK with taking this patch as a fix for 4.14, or would you rather
have something that can safely backport past 4.12 without implicit
dependencies? This is a config/link-order dependent thing that's been
lurking since the beginning, but only coming to light now that other
drivers are changing their behaviour, so I don't think there's really a
single Fixes: commit that can be singled out.
Can someone update me on the fate of this patch? Can someone queue it
for the next release?
Sorry, this is another patch that wasn't on my radar while Joerg is out
on paternity leave. I didn't follow the replies to Laurent's question
about ordering and perhaps this plays in to Robin asking about fixes
for specific kernel versions. It seems there are some changes
elsewhere that somehow defer the ordering problem or don't matter on an
Arm Juno board (whatever that is). Can someone explain?
To clarify, the ipmmu-vmsa driver is not enabled in the arm64 defconfig,
but turning it on causes crashes on non-Renesas platforms with different
IOMMUs (e.g. the Juno dev board[1] which has ARM SMMUs), because it
still relies on initcalls to initialise the IOMMU before its masters,
whereas other drivers like arm-smmu have now transitioned to using the
probe-deferral mechanism. Back when everything ran off initcalls,
arm-smmu would get there first (thanks to link order) and we never saw a
problem, but since the ipmmu-vmsa initcall doesn't check whether any
IPMMU device is actually present in the system before grabbing the bus
ops, it now breaks other drivers' probe-time setup.
If there's a
desire for a stable tag for this, it seems like we need to know
explicitly the range where it's safe to apply. Also, the patch needs
to be updated and re-evaluated in the presence of:
cda52fcd999f iommu/ipmmu-vmsa: Make use of IOMMU_OF_DECLARE()
Actually, I overlooked it the first time, but Liviu's patch did in fact
need an IOMMU_OF_DECLARE() in order to correctly trigger probe-deferral
and avoid Laurent's concerns. However, cda52fcd999f does now mostly
supersede it (I've checked that the arm64 case is OK; 32-bit
multiplatform kernels might possibly still be broken, but how much
anyone's relying on IOMMU support in those I don't know).
Robin.
[1]:https://developer.arm.com/products/system-design/development-boards/juno-development-board
Thanks,
Alex
Signed-off-by: Liviu Dudau <liviu.du...@arm.com>
Cc: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>
---
drivers/iommu/ipmmu-vmsa.c | 29 +++++------------------------
1 file changed, 5 insertions(+), 24 deletions(-)
diff --git a/drivers/iommu/ipmmu-vmsa.c b/drivers/iommu/ipmmu-vmsa.c
index 195d6e93ac718..31912997bffdf 100644
--- a/drivers/iommu/ipmmu-vmsa.c
+++ b/drivers/iommu/ipmmu-vmsa.c
@@ -966,10 +966,11 @@ static int ipmmu_probe(struct platform_device *pdev)
return ret;
/*
- * We can't create the ARM mapping here as it requires the bus to have
- * an IOMMU, which only happens when bus_set_iommu() is called in
- * ipmmu_init() after the probe function returns.
+ * Now that we have validated the presence of the hardware, set
+ * the bus IOMMU ops to enable future domain and device setup.
*/
+ if (!iommu_present(&platform_bus_type))
+ bus_set_iommu(&platform_bus_type, &ipmmu_ops);
platform_set_drvdata(pdev, mmu);
@@ -1006,27 +1007,7 @@ static struct platform_driver ipmmu_driver = {
.remove = ipmmu_remove,
};
-static int __init ipmmu_init(void)
-{
- int ret;
-
- ret = platform_driver_register(&ipmmu_driver);
- if (ret < 0)
- return ret;
-
- if (!iommu_present(&platform_bus_type))
- bus_set_iommu(&platform_bus_type, &ipmmu_ops);
-
- return 0;
-}
-
-static void __exit ipmmu_exit(void)
-{
- return platform_driver_unregister(&ipmmu_driver);
-}
-
-subsys_initcall(ipmmu_init);
-module_exit(ipmmu_exit);
+module_platform_driver(ipmmu_driver);
MODULE_DESCRIPTION("IOMMU API for Renesas VMSA-compatible IPMMU");
MODULE_AUTHOR("Laurent Pinchart <laurent.pinch...@ideasonboard.com>");
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
