Hi Simon, as discussed with you Sergei and Geert, in order to enable EtherAVB for R8A77965 we first wanted to make the phy-mode "rgmii-txid" a board specific property for all other SoCs.
This series adds the phy-mode property to salvator-common.dtsi and reset the one for R8A77965/R8A7796/R8A77995 to "rgmii". Then, in order to enable EtherAVB for R-Car M3-N, iommu nodes had to be added as they are referenced by the "avb" device node (CC the iommu list for the series for that reason). Series based on what you already applied to your development tree (M3-N initial support - EtherAVB + DTS fixes). A branch for testing is available at git://jmondi.org/linux m3-n/renesas-drivers-2018-02-13-v4.16-rc1/v2-simon Thanks j Jacopo Mondi (8): arm64: dts: renesas: salvator-common: Override EtherAVB phy-mode arm64: dts: renesas: r8a7796: Set EtherAVB phy mode to "rgmii" arm64: dts: renesas: r8a7795: Set EtherAVB phy mode to "rgmii" arm64: dts: renesas: r8a77995: Set EtherAVB phy mode to "rgmii" dt-bindings: iommu/ipmmu-vmsa: Add R-Car M3-N (R8A77965) iommu/ipmmu-vmsa: Hook up R8A77965 DT matching code arm64: dts: renesas: r8a77965: Add IPMMU mm and ds0 blocks arm64: dts: renesas: r8a77965: Add EtherAVB device node .../bindings/iommu/renesas,ipmmu-vmsa.txt | 1 + arch/arm64/boot/dts/renesas/r8a7795.dtsi | 2 +- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 2 +- arch/arm64/boot/dts/renesas/r8a77965.dtsi | 61 ++++++++++++++++++++-- arch/arm64/boot/dts/renesas/r8a77995.dtsi | 2 +- arch/arm64/boot/dts/renesas/salvator-common.dtsi | 1 + drivers/iommu/ipmmu-vmsa.c | 5 ++ 7 files changed, 68 insertions(+), 6 deletions(-) -- 2.7.4 _______________________________________________ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
