On Wed, 19 Sep 2018 02:22:03 +0000 "Tian, Kevin" <kevin.t...@intel.com> wrote:
> > From: Jean-Philippe Brucker [mailto:jean-philippe.bruc...@arm.com] > > Sent: Tuesday, September 18, 2018 11:47 PM > > > > On 14/09/2018 22:04, Jacob Pan wrote: > > >> This example only needs to modify first-level translation, and > > >> works with SMMUv3. The kernel here could be the host, in which > > >> case second-level translation is disabled in the SMMU, or it > > >> could be the guest, in which case second-level mappings are > > >> created by QEMU and first-level translation is managed by > > >> assigning PASID tables to the guest. > > > There is a difference in case of guest SVA. VT-d v3 will bind > > > guest PASID and guest CR3 instead of the guest PASID table. Then > > > turn on nesting. In case of mdev, the second level is obtained > > > from the aux domain which was setup for the default PASID. Or in > > > case of PCI device, second level is harvested from RID2PASID. > > > > Right, though I wasn't talking about the host managing guest SVA > > here, but a kernel binding the address space of one of its > > userspace drivers to the mdev. > > > > >> So (2) would use iommu_sva_bind_device(), > > > We would need something different than that for guest bind, just > > > to show the two cases:> > > > int iommu_sva_bind_device(struct device *dev, struct mm_struct > > > *mm, > > int > > > *pasid, unsigned long flags, void *drvdata) > > > > > > (WIP) > > > int sva_bind_gpasid(struct device *dev, struct gpasid_bind_data > > > *data) where: > > > /** > > > * struct gpasid_bind_data - Information about device and guest > > > PASID binding > > > * @pasid: Process address space ID used for the guest mm > > > * @addr_width: Guest address width. Paging mode can also be > > > derived. > > > * @gcr3: Guest CR3 value from guest mm > > > */ > > > struct gpasid_bind_data { > > > __u32 pasid; > > > __u64 gcr3; > > > __u32 addr_width; > > > __u32 flags; > > > #define IOMMU_SVA_GPASID_SRE BIT(0) /* supervisor request */ > > > }; > > > Perhaps there is room to merge with io_mm but the life cycle > > management > > > of guest PASID and host PASID will be different if you rely on mm > > > release callback than FD. > > let's not calling gpasid here - which makes sense only in > bind_pasid_table proposal where pasid table thus pasid space is > managed by guest. In above context it is always about host pasid > (allocated in system-wide), which could point to a host cr3 (user > process) or a guest cr3 (vm case). > I agree this gpasid is confusing, we have a system wide PASID name space. Just a way to differentiate different bind, perhaps just a flag indicating the PASID is used for guest. i.e. struct pasid_bind_data { __u32 pasid; __u64 gcr3; __u32 addr_width; __u32 flags; #define IOMMU_SVA_GPASID_SRE BIT(0) /* supervisor request */ #define IOMMU_SVA_PASID_GUEST BIT(0) /* host pasid used by guest */ }; > > I think gpasid management should stay separate from io_mm, since in > > your case VFIO mechanisms are used for life cycle management of the > > VM, similarly to the former bind_pasid_table proposal. For example > > closing the container fd would unbind all guest page tables. The > > QEMU process' address space lifetime seems like the wrong thing to > > track for gpasid. > > I sort of agree (though not thinking through all the flow carefully). > PASIDs are allocated per iommu domain, thus release also happens when > domain is detached (along with container fd close). > I also prefer to keep gpasid separate. But I don't think we need to have per iommu domain per PASID for guest SVA case. Assuming you are talking about host IOMMU domain. The PASID bind call is a result of guest PASID cache flush with a PASID previously allocated. The host just need to put gcr3 into the PASID entry then harvest the second level from the existing domain. > > > > >> but (1) needs something > > >> else. Aren't auxiliary domains suitable for (1)? Why limit > > >> auxiliary domain to second-level or nested translation? It seems > > >> silly to use a different API for first-level, since the flow in > > >> userspace and VFIO is the same as your second-level case as far > > >> as MAP_DMA ioctl goes. The difference is that in your case the > > >> auxiliary domain supports an additional operation which binds > > >> first-level page tables. An auxiliary domain that only supports > > >> first-level wouldn't support this operation, but it can still > > >> implement iommu_map/unmap/etc. > > > I think the intention is that when a mdev is created, we don;t > > > know whether it will be used for SVA or IOVA. So aux domain is > > > here to "hold a spot" for the default PASID such that MAP_DMA > > > calls can work as usual, which is second level only. Later, if > > > SVA is used on the mdev there will be another PASID allocated for > > > that purpose. Do we need to create an aux domain for each PASID? > > > the translation can be looked up by the combination of parent dev > > > and pasid. > > > > When allocating a new PASID for the guest, I suppose you need to > > clone the second-level translation config? In which case a single > > aux domain for the mdev might be easier to implement in the IOMMU > > driver. Entirely up to you since we don't have this case on SMMUv3 > > > > One thing to highlight in related discussions (also mentioned in other > thread). There is not a new iommu domain type called 'aux'. 'aux' > matters only to a specific device when a domain is attached to that > device which has aux capability enabled. Same domain can be attached > to other device as normal domain. In that case multiple PASIDs > allocated on same mdev are tied to same aux domain, same bare metal > SVA case, i.e. any domain (normal or aux) can include 2nd level > structure and multiple 1st level structures. Jean is correct - all > PASIDs in same domain then share 2nd level translation, and there are > io_mm or similar tracking structures to associate each PASID to a 1st > level translation structure. > I think we are all talking about the same thing :) yes, 2nd level is cloned from aux domain/default PASID for mdev, and pdev similarly from DMA_MAP domain. > Thanks > Kevin > _______________________________________________ > iommu mailing list > iommu@lists.linux-foundation.org > https://lists.linuxfoundation.org/mailman/listinfo/iommu [Jacob Pan] _______________________________________________ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu