The current code uses set_irte_sid() with SVT_VERIFY_BUS and PCI_DEVID to set the SID value. However, this is very confusing because, with SVT_VERIFY_BUS, the SID value is not a PCI devfn address, but the start and end bus numbers to match against.
According to the Intel Virtualization Technology for Directed I/O Architecture Specification, Rev. 3.0, page 9-36: The most significant 8-bits of the SID field contains the Startbus#, and the least significant 8-bits of the SID field contains the Endbus#. Interrupt requests that reference this IRTE must have a requester-id whose bus# (most significant 8-bits of requester-id) has a value equal to or within the Startbus# to Endbus# range. So to make this more clear, introduce a new set_irte_verify_bus() that explicitly takes a start bus and end bus so that we can stop abusing the PCI_DEVID macro. This helper function will be called a second time in an subsequent patch. Signed-off-by: Logan Gunthorpe <log...@deltatee.com> Cc: David Woodhouse <dw...@infradead.org> Cc: Joerg Roedel <j...@8bytes.org> Cc: Jacob Pan <jacob.jun....@linux.intel.com> --- drivers/iommu/intel_irq_remapping.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c index 24d45b07f425..5a55bef8e379 100644 --- a/drivers/iommu/intel_irq_remapping.c +++ b/drivers/iommu/intel_irq_remapping.c @@ -294,6 +294,18 @@ static void set_irte_sid(struct irte *irte, unsigned int svt, irte->sid = sid; } +/* + * Set an IRTE to match only the bus number. Interrupt requests that reference + * this IRTE must have a requester-id whose bus number is between or equal + * to the start_bus and end_bus arguments. + */ +static void set_irte_verify_bus(struct irte *irte, unsigned int start_bus, + unsigned int end_bus) +{ + set_irte_sid(irte, SVT_VERIFY_BUS, SQ_ALL_16, + (start_bus << 8) | end_bus); +} + static int set_ioapic_sid(struct irte *irte, int apic) { int i; @@ -391,9 +403,8 @@ static int set_msi_sid(struct irte *irte, struct pci_dev *dev) * original device. */ if (PCI_BUS_NUM(data.alias) != data.pdev->bus->number) - set_irte_sid(irte, SVT_VERIFY_BUS, SQ_ALL_16, - PCI_DEVID(PCI_BUS_NUM(data.alias), - dev->bus->number)); + set_irte_verify_bus(irte, PCI_BUS_NUM(data.alias), + dev->bus->number); else if (data.pdev->bus->number != dev->bus->number) set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_ALL_16, data.alias); else -- 2.19.0 _______________________________________________ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu