Hi Jerry,
On 2020-02-14 8:13 pm, Jerry Snitselaar wrote:
Hi Will,
On a gigabyte system with Cavium CN8xx, when doing a fio test against
an nvme drive we are seeing the following:
[ 637.161194] arm-smmu arm-smmu.1.auto: Unhandled context fault:
fsr=0x80000402, iova=0x8010003f6000, fsynr=0x70091, cbfrsynra=0x9000, cb=7
[ 637.174329] arm-smmu arm-smmu.1.auto: Unhandled context fault:
fsr=0x80000402, iova=0x801000036000, fsynr=0x70091, cbfrsynra=0x9000, cb=7
[ 637.186887] arm-smmu arm-smmu.1.auto: Unhandled context fault:
fsr=0x80000402, iova=0x8010002ee000, fsynr=0x70091, cbfrsynra=0x9000, cb=7
[ 637.199275] arm-smmu arm-smmu.1.auto: Unhandled context fault:
fsr=0x80000402, iova=0x8010003c7000, fsynr=0x70091, cbfrsynra=0x9000, cb=7
[ 637.211885] arm-smmu arm-smmu.1.auto: Unhandled context fault:
fsr=0x80000402, iova=0x801000392000, fsynr=0x70091, cbfrsynra=0x9000, cb=7
[ 637.224580] arm-smmu arm-smmu.1.auto: Unhandled context fault:
fsr=0x80000402, iova=0x801000018000, fsynr=0x70091, cbfrsynra=0x9000, cb=7
[ 637.237241] arm-smmu arm-smmu.1.auto: Unhandled context fault:
fsr=0x80000402, iova=0x801000360000, fsynr=0x70091, cbfrsynra=0x9000, cb=7
[ 637.249657] arm-smmu arm-smmu.1.auto: Unhandled context fault:
fsr=0x80000402, iova=0x8010000ba000, fsynr=0x70091, cbfrsynra=0x9000, cb=7
[ 637.262120] arm-smmu arm-smmu.1.auto: Unhandled context fault:
fsr=0x80000402, iova=0x80100003e000, fsynr=0x70091, cbfrsynra=0x9000, cb=7
[ 637.274468] arm-smmu arm-smmu.1.auto: Unhandled context fault:
fsr=0x80000402, iova=0x801000304000, fsynr=0x70091, cbfrsynra=0x9000, cb=7
Those "IOVAs" don't look much like IOVAs from the DMA allocator - if
they were physical addresses, would they correspond to an expected
region of the physical memory map?
I would suspect that this is most likely misbehaviour in the NVMe driver
(issuing a write to a non-DMA-mapped address), and the SMMU is just
doing its job in blocking and reporting it.
I also reproduced with 5.5-rc7, and will check 5.6-rc1 later today. I
couldn't narrow it down further into 5.4-rc1.
I don't know smmu or the code well, any thoughts on where to start
digging into this?
fio test that is being run is:
#fio -filename=/dev/nvme0n1 -iodepth=64 -thread -rw=randwrite
-ioengine=libaio -bs=4k -runtime=43200 -size=-group_reporting
-name=mytest -numjobs=32
Just to clarify, do other tests work OK on the same device?
Thanks,
Robin.
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
