Presently, the default domain of an iommu_group is allocated during boot
time (i.e. when a device is being added to a group) and it cannot be
changed later. So, the device would typically be either in identity (also
known as pass_through) mode (controlled by "iommu=pt" kernel command line
argument) or the device would be in DMA mode as long as the machine is up
and running. There is no way to change the default domain type dynamically
i.e. after booting, a device cannot switch between identity mode and DMA
mode.
But, assume a use case wherein the user trusts the device and also believes
that the OS is secure enough and hence wants *only* this device to bypass
IOMMU (so that it could be high performing) whereas all the other devices
to go through IOMMU (so that the system is protected). Presently, this use
case is not supported. Hence it will be helpful if there is some way to
change the default domain of a B:D.F dynamically. Since, linux iommu
subsystem prefers to deal at iommu_group level instead of B:D.F level, it
might be helpful if there is some way to change the default domain of a
*iommu_group* dynamically. Hence, add such support.
A privileged user could request the kernel to change the default domain
type of a iommu_group by writing to
"/sys/kernel/iommu_groups/<grp_id>/type"
file. Presently, only three values are supported
1. identity: all the DMA transactions from the devices in this group are
*not* translated by the iommu
2. DMA: all the DMA transactions from the devices in this group are
translated by the iommu
3. auto: kernel decides one among DMA/identity
Also please note that a group type could be modified only when *all* the
devices in the group are not binded to any device driver. Please see
"Documentation/ABI/testing/sysfs-kernel-iommu_groups" for more information.
Cc: Christoph Hellwig <h...@lst.de>
Cc: Joerg Roedel <j...@8bytes.org>
Cc: Ashok Raj <ashok....@intel.com>
Cc: Will Deacon <will.dea...@arm.com>
Cc: Lu Baolu <baolu...@linux.intel.com>
Cc: Sohil Mehta <sohil.me...@intel.com>
Cc: Robin Murphy <robin.mur...@arm.com>
Cc: Jacob Pan <jacob.jun....@linux.intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prak...@intel.com>
---
drivers/iommu/iommu.c | 227 +++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 226 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 3e3528436e0b..56a29076871f 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -225,6 +225,8 @@ static int __iommu_attach_group(struct iommu_domain *domain,
struct iommu_group *group);
static void __iommu_detach_group(struct iommu_domain *domain,
struct iommu_group *group);
+static ssize_t iommu_group_store_type(struct iommu_group *group,
+ const char *buf, size_t count);
static int __init iommu_set_def_domain_type(char *str)
{
@@ -448,7 +450,8 @@ static IOMMU_GROUP_ATTR(name, S_IRUGO,
iommu_group_show_name, NULL);
static IOMMU_GROUP_ATTR(reserved_regions, 0444,
iommu_group_show_resv_regions, NULL);
-static IOMMU_GROUP_ATTR(type, 0444, iommu_group_show_type, NULL);
+static IOMMU_GROUP_ATTR(type, 0644, iommu_group_show_type,
+ iommu_group_store_type);
static void iommu_group_release(struct kobject *kobj)
{
@@ -2654,3 +2657,225 @@ int iommu_sva_get_pasid(struct iommu_sva *handle)
return ops->sva_get_pasid(handle);
}
EXPORT_SYMBOL_GPL(iommu_sva_get_pasid);
+
+/*
+ * Changes the default domain of a group
+ *
+ * @group: The group for which the default domain should be changed
+ * @prv_dom: The previous domain that is being switched from
+ * @type: The type of the new default domain that gets associated with the
group
+ *
+ * Returns 0 on success and error code on failure
+ */
+static int iommu_group_change_def_domain(struct iommu_group *group,
+ struct iommu_domain *prv_dom,
+ int type)
+{
+ struct group_device *grp_dev, *temp;
+ struct iommu_domain *new_domain;
+ int ret;
+
+ /*
+ * iommu_domain_alloc() takes "struct bus_type" as an argument which is
+ * a member in "struct device". Changing a group's default domain type
+ * deals at iommu_group level rather than device level and hence there
+ * is no straight forward way to get "bus_type" of an iommu_group that
+ * could be passed to iommu_domain_alloc(). So, instead of directly
+ * calling iommu_domain_alloc(), use iommu_ops from previous default
+ * domain.
+ */
+ if (!prv_dom || !prv_dom->ops || !prv_dom->ops->domain_alloc || !type)
+ return -EINVAL;
+
+ /* Allocate a new domain of requested type */
+ new_domain = prv_dom->ops->domain_alloc(type);
+ if (!new_domain) {
+ pr_err("Unable to allocate memory for the new domain\n");
+ return -ENOMEM;
+ }
+
+ new_domain->type = type;
+ new_domain->ops = prv_dom->ops;
+ new_domain->pgsize_bitmap = prv_dom->pgsize_bitmap;
+
+ /*
+ * Set these upfront here because iommu_group_add_device() and
+ * iommu_group_create_direct_mappings() needs these to be set
+ */
+ mutex_lock(&group->mutex);
+ group->default_domain = new_domain;
+ group->domain = new_domain;
+ mutex_unlock(&group->mutex);
+
+ iommu_group_ref_get(group);
+
+ list_for_each_entry_safe(grp_dev, temp, &group->devices, list) {
+ struct device *dev;
+
+ dev = grp_dev->dev;
+ iommu_release_device(dev);
+
+ ret = iommu_group_add_device(group, dev);
+ if (ret)
+ dev_err(dev, "Failed to add to iommu group %d: %d\n",
+ group->id, ret);
+
+ ret = prv_dom->ops->add_device(dev);
+ if (ret)
+ dev_err(dev, "Error adding to iommu: %d\n", ret);
+ }
+
+ iommu_group_put(group);
+ iommu_domain_free(prv_dom);
+ return 0;
+}
+
+static int is_driver_bound(struct device *dev, void *not_used)
+{
+ int ret = 0;
+
+ device_lock(dev);
+ if (device_is_bound(dev))
+ ret = 1;
+ device_unlock(dev);
+ return ret;
+}
+
+static ssize_t iommu_group_store_type(struct iommu_group *group,
+ const char *buf, size_t count)
+{
+ int ret = 0, req_type = 0, req_auto = 0;
+ struct iommu_domain *prv_dom;
+ struct group_device *grp_dev;
+ const struct iommu_ops *ops;
+ struct device *dev;
+
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
+
+ if (WARN_ON(!group))
+ return -EINVAL;
+
+ if (sysfs_streq(buf, "identity"))
+ req_type = IOMMU_DOMAIN_IDENTITY;
+ else if (sysfs_streq(buf, "DMA"))
+ req_type = IOMMU_DOMAIN_DMA;
+ else if (sysfs_streq(buf, "auto"))
+ req_auto = 1;
+ else
+ return -EINVAL;
+
+ /*
+ * Check if any device in the group still has a driver binded to it.
+ * This might race with device driver probing code and unfortunately
+ * there is no clean way out of that either, locking all devices in the
+ * group and then do the re-attach will introduce a lock-inversion with
+ * group->mutex - Joerg.
+ */
+ if (iommu_group_for_each_dev(group, NULL, is_driver_bound)) {
+ pr_err("Active drivers exist for devices in the group\n");
+ return -EBUSY;
+ }
+
+ mutex_lock(&group->mutex);
+ prv_dom = group->default_domain;
+ if (!prv_dom || !prv_dom->ops || !prv_dom->ops->dev_def_domain_type) {
+ pr_err("'dev_def_domain_type' call back isn't registered\n");
+ ret = -EPERM;
+ goto out;
+ }
+
+ /*
+ * Check if any user level driver (that doesn't use kernel driver like
+ * VFIO) is directly using the group. VFIO use case is detected by
+ * is_driver_bound() check above
+ */
+ if (prv_dom != group->domain) {
+ pr_err("Group assigned to user level for direct access\n");
+ ret = -EBUSY;
+ goto out;
+ }
+
+ /*
+ * If user has requested "auto", kernel has to decide the default domain
+ * type of a group. Hence, find out individual preferences of a device.
+ */
+ ops = prv_dom->ops;
+ if (req_auto) {
+ int dma_devs = 0, idt_devs = 0, dev_def_dom;
+
+ list_for_each_entry(grp_dev, &group->devices, list) {
+ dev = grp_dev->dev;
+ dev_def_dom = ops->dev_def_domain_type(dev);
+ if (dev_def_dom == IOMMU_DOMAIN_IDENTITY)
+ idt_devs++;
+ if (dev_def_dom == IOMMU_DOMAIN_DMA)
+ dma_devs++;
+ }
+
+ /*
+ * Default domain type of a group is undefined if some devices
+ * in the group should be in dma domain while other devices
+ * should be in identity domain
+ */
+ if (idt_devs && dma_devs) {
+ pr_err("Some devices need identity domain while other
need dma domain\n");
+ ret = -EPERM;
+ goto out;
+ }
+
+ /*
+ * Default domain type of a group is identity if
+ * 1. All the devices in the group need to be in identity domain
+ * 2. Some devices should be in identity domain while other
+ * devices could be in either of dma or identity domain
+ */
+ if (idt_devs && !dma_devs)
+ req_type = IOMMU_DOMAIN_IDENTITY;
+
+ /*
+ * Default domain type of a group is dma if
+ * 1. All the devices in the group need to be in dma domain
+ * 2. Some devices should be in dma domain while other devices
+ * could be in either of dma or identity domain
+ * 3. All the devices could be in either of the domains (namely
+ * dma and identity)
+ */
+ if (!idt_devs)
+ req_type = IOMMU_DOMAIN_DMA;
+ }
+
+ /*
+ * Switch to a new domain only if the requested domain type is different
+ * from the existing default domain type
+ */
+ if (prv_dom->type == req_type)
+ goto out;
+
+ /*
+ * Every device may not support both the domain types (namely DMA and
+ * identity), so check if it's ok to change domain type of every device
+ * in the group to the requested domain. This check is not required if
+ * user has requested "auto" because it's already done above implicitly.
+ */
+ if (!req_auto) {
+ list_for_each_entry(grp_dev, &group->devices, list) {
+ int allowed_types;
+
+ dev = grp_dev->dev;
+ allowed_types = ops->dev_def_domain_type(dev);
+ if (allowed_types && allowed_types != req_type) {
+ dev_err(dev, "Cannot be in %s domain\n", buf);
+ ret = -EPERM;
+ goto out;
+ }
+ }
+ }
+
+ mutex_unlock(&group->mutex);
+ ret = iommu_group_change_def_domain(group, prv_dom, req_type);
+ return ret ?: count;
+out:
+ mutex_unlock(&group->mutex);
+ return ret ?: count;
+}
--
2.7.4
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
