On Fri, Feb 28, 2020 at 09:33:40AM +0000, John Garry wrote: > On 28/02/2020 02:16, Lu Baolu wrote: > > Hi, > > > > On 2020/2/27 19:57, Russell King wrote: > > > On the LX2160A, there are lots (about 160) of IOMMU messages produced > > > during boot; this is excessive. Reduce the severity of these messages > > > to debug level. > > > > > > Signed-off-by: Russell King <rmk+ker...@armlinux.org.uk> > > > --- > > > drivers/iommu/iommu.c | 4 ++-- > > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > > > diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c > > > index 3ead597e1c57..304281ec623b 100644 > > > --- a/drivers/iommu/iommu.c > > > +++ b/drivers/iommu/iommu.c > > > @@ -741,7 +741,7 @@ int iommu_group_add_device(struct iommu_group > > > *group, struct device *dev) > > > trace_add_device_to_group(group->id, dev); > > > - dev_info(dev, "Adding to iommu group %d\n", group->id); > > > + dev_dbg(dev, "Adding to iommu group %d\n", group->id); > > > > I'm not strongly against this. But to me this message seems to be a good > > indicator that a device was probed successfully by the iommu subsystem. > > Keeping it in the default kernel message always helps to the kernel > > debugging. > > > > I would tend to agree.
Here's the boot messages. Notice how many of these "Adding to iommu group" messages there are: [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 5.5.0+ (rmk@rmk-PC) (gcc version 4.9.2 (GCC)) #655 SMP PREEMPT Fri Feb 28 09:54:47 GMT 2020 [ 0.000000] Machine model: SolidRun LX2160A Clearfog CX [ 0.000000] earlycon: pl11 at MMIO32 0x00000000021c0000 (options '') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 32 MiB at 0x00000000f9c00000 [ 0.000000] On node 0 totalpages: 1555968 [ 0.000000] DMA zone: 4096 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 262144 pages, LIFO batch:63 [ 0.000000] DMA32 zone: 3832 pages used for memmap [ 0.000000] DMA32 zone: 245248 pages, LIFO batch:63 [ 0.000000] Normal zone: 16384 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 31 pages/cpu s88968 r8192 d29816 u126976 [ 0.000000] pcpu-alloc: s88968 r8192 d29816 u126976 alloc=31*4096 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 [ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] CPU features: detected: ARM erratum 1319367 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1531656 [ 0.000000] Kernel command line: console=ttyAMA0,115200 root=PARTUUID=c7837e2f-02 rootwait earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0 pci=pcie_bus_perf arm_smmu.disable_bypass=0 iommu.passthrough=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB) [ 0.000000] Memory: 5991500K/6223872K available (10172K kernel code, 1376K rwdata, 3888K rodata, 960K init, 4326K bss, 199604K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=16. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: no VLPI support, no direct LPI support [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006200000 [ 0.000000] ITS [mem 0x06020000-0x0603ffff] [ 0.000000] ITS@0x0000000006020000: allocated 65536 Devices @2178d00000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000002178cd0000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000002178ce0000 [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c409fb33, max_idle_ns: 440795203156 ns [ 0.000002] sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 4398046511103ns [ 0.006921] Console: colour dummy device 80x25 [ 0.010093] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.016605] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.019421] ... MAX_LOCK_DEPTH: 48 [ 0.022329] ... MAX_LOCKDEP_KEYS: 8192 [ 0.025408] ... CLASSHASH_SIZE: 4096 [ 0.028491] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.031659] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.034830] ... CHAINHASH_SIZE: 32768 [ 0.037997] memory used by lock dependency info: 3509 kB [ 0.042135] per task-struct memory footprint: 1920 bytes [ 0.046292] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000) [ 0.055443] pid_max: default: 32768 minimum: 301 [ 0.058844] LSM: Security Framework initializing [ 0.062241] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.068602] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.099452] ASID allocator initialised with 32768 entries [ 0.111615] rcu: Hierarchical SRCU implementation. [ 0.119672] Platform MSI: gic-its@6020000 domain created [ 0.123765] PCI/MSI: /interrupt-controller@6000000/gic-its@6020000 domain created [ 0.130045] fsl-mc MSI: /interrupt-controller@6000000/gic-its@6020000 domain created [ 0.136572] EFI services will not be available. [ 0.148587] smp: Bringing up secondary CPUs ... [ 0.180732] Detected PIPT I-cache on CPU1 [ 0.180749] GICv3: CPU1: found redistributor 1 region 0:0x0000000006220000 [ 0.180761] GICv3: CPU1: using allocated LPI pending table @0x0000002178cf0000 [ 0.180781] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.212781] Detected PIPT I-cache on CPU2 [ 0.212797] GICv3: CPU2: found redistributor 100 region 0:0x0000000006240000 [ 0.212810] GICv3: CPU2: using allocated LPI pending table @0x0000002178d80000 [ 0.212830] CPU2: Booted secondary processor 0x0000000100 [0x410fd083] [ 0.244832] Detected PIPT I-cache on CPU3 [ 0.244844] GICv3: CPU3: found redistributor 101 region 0:0x0000000006260000 [ 0.244855] GICv3: CPU3: using allocated LPI pending table @0x0000002178d90000 [ 0.244871] CPU3: Booted secondary processor 0x0000000101 [0x410fd083] [ 0.276894] Detected PIPT I-cache on CPU4 [ 0.276910] GICv3: CPU4: found redistributor 200 region 0:0x0000000006280000 [ 0.276922] GICv3: CPU4: using allocated LPI pending table @0x0000002178da0000 [ 0.276941] CPU4: Booted secondary processor 0x0000000200 [0x410fd083] [ 0.308953] Detected PIPT I-cache on CPU5 [ 0.308966] GICv3: CPU5: found redistributor 201 region 0:0x00000000062a0000 [ 0.308978] GICv3: CPU5: using allocated LPI pending table @0x0000002178db0000 [ 0.308994] CPU5: Booted secondary processor 0x0000000201 [0x410fd083] [ 0.341009] Detected PIPT I-cache on CPU6 [ 0.341027] GICv3: CPU6: found redistributor 300 region 0:0x00000000062c0000 [ 0.341039] GICv3: CPU6: using allocated LPI pending table @0x0000002178dc0000 [ 0.341058] CPU6: Booted secondary processor 0x0000000300 [0x410fd083] [ 0.373064] Detected PIPT I-cache on CPU7 [ 0.373079] GICv3: CPU7: found redistributor 301 region 0:0x00000000062e0000 [ 0.373091] GICv3: CPU7: using allocated LPI pending table @0x0000002178dd0000 [ 0.373106] CPU7: Booted secondary processor 0x0000000301 [0x410fd083] [ 0.405124] Detected PIPT I-cache on CPU8 [ 0.405143] GICv3: CPU8: found redistributor 400 region 0:0x0000000006300000 [ 0.405156] GICv3: CPU8: using allocated LPI pending table @0x0000002178de0000 [ 0.405175] CPU8: Booted secondary processor 0x0000000400 [0x410fd083] [ 0.437179] Detected PIPT I-cache on CPU9 [ 0.437195] GICv3: CPU9: found redistributor 401 region 0:0x0000000006320000 [ 0.437207] GICv3: CPU9: using allocated LPI pending table @0x0000002178df0000 [ 0.437223] CPU9: Booted secondary processor 0x0000000401 [0x410fd083] [ 0.469240] Detected PIPT I-cache on CPU10 [ 0.469261] GICv3: CPU10: found redistributor 500 region 0:0x0000000006340000 [ 0.469273] GICv3: CPU10: using allocated LPI pending table @0x0000002178e00000 [ 0.469293] CPU10: Booted secondary processor 0x0000000500 [0x410fd083] [ 0.501296] Detected PIPT I-cache on CPU11 [ 0.501314] GICv3: CPU11: found redistributor 501 region 0:0x0000000006360000 [ 0.501326] GICv3: CPU11: using allocated LPI pending table @0x0000002178e10000 [ 0.501342] CPU11: Booted secondary processor 0x0000000501 [0x410fd083] [ 0.533362] Detected PIPT I-cache on CPU12 [ 0.533385] GICv3: CPU12: found redistributor 600 region 0:0x0000000006380000 [ 0.533397] GICv3: CPU12: using allocated LPI pending table @0x0000002178e20000 [ 0.533418] CPU12: Booted secondary processor 0x0000000600 [0x410fd083] [ 0.565408] Detected PIPT I-cache on CPU13 [ 0.565427] GICv3: CPU13: found redistributor 601 region 0:0x00000000063a0000 [ 0.565440] GICv3: CPU13: using allocated LPI pending table @0x0000002178e30000 [ 0.565455] CPU13: Booted secondary processor 0x0000000601 [0x410fd083] [ 0.597470] Detected PIPT I-cache on CPU14 [ 0.597494] GICv3: CPU14: found redistributor 700 region 0:0x00000000063c0000 [ 0.597507] GICv3: CPU14: using allocated LPI pending table @0x0000002178e40000 [ 0.597527] CPU14: Booted secondary processor 0x0000000700 [0x410fd083] [ 0.629523] Detected PIPT I-cache on CPU15 [ 0.629543] GICv3: CPU15: found redistributor 701 region 0:0x00000000063e0000 [ 0.629556] GICv3: CPU15: using allocated LPI pending table @0x0000002178e50000 [ 0.629571] CPU15: Booted secondary processor 0x0000000701 [0x410fd083] [ 0.629684] smp: Brought up 1 node, 16 CPUs [ 0.931457] SMP: Total of 16 processors activated. [ 0.934986] CPU features: detected: 32-bit EL0 Support [ 0.938858] CPU features: detected: CRC32 instructions [ 0.947732] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.954876] CPU: All CPU(s) started at EL2 [ 0.957748] alternatives: patching kernel code [ 0.961954] devtmpfs: initialized [ 0.968138] random: get_random_u32 called from bucket_table_alloc.isra.22+0x88/0x1e0 with crng_init=0 [ 0.976604] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.985153] futex hash table entries: 4096 (order: 7, 524288 bytes, linear) [ 0.991643] pinctrl core: initialized pinctrl subsystem [ 0.996213] thermal_sys: Registered thermal governor 'step_wise' [ 0.996473] DMI not present or invalid. [ 1.004023] NET: Registered protocol family 16 [ 1.008239] DMA: preallocated 256 KiB pool for atomic allocations [ 1.013102] audit: initializing netlink subsys (disabled) [ 1.017340] audit: type=2000 audit(0.828:1): state=initialized audit_enabled=0 res=1 [ 1.023873] cpuidle: using governor ladder [ 1.026734] cpuidle: using governor menu [ 1.029477] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 1.035332] Serial: AMBA PL011 UART driver [ 1.039319] Machine: SolidRun LX2160A Clearfog CX [ 1.042751] SoC family: QorIQ LX2160A [ 1.045135] SoC ID: svr:0x87361010, Revision: 1.0 [ 1.049775] 21c0000.serial: ttyAMA0 at MMIO 0x21c0000 (irq = 17, base_baud = 0) is a SBSA [ 1.056765] printk: console [ttyAMA0] enabled [ 1.062890] printk: bootconsole [pl11] disabled [ 1.069745] 21d0000.serial: ttyAMA1 at MMIO 0x21d0000 (irq = 18, base_baud = 0) is a SBSA [ 1.083284] fsl_mc_bus 80c000000.fsl-mc: MC firmware version: 10.18.0 [ 1.091046] fsl_mc_dprc dprc.1: DMA mask not set [ 1.104098] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 1.109500] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 1.114906] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.120298] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 1.127238] cryptd: max_cpu_qlen set to 1000 [ 1.132187] iommu: Default domain type: Translated (set via kernel command line) [ 1.138411] vgaarb: loaded [ 1.140045] SCSI subsystem initialized [ 1.142660] libata version 3.00 loaded. [ 1.142830] usbcore: registered new interface driver usbfs [ 1.147050] usbcore: registered new interface driver hub [ 1.151152] usbcore: registered new device driver usb [ 1.155269] imx-i2c 2000000.i2c: can't get pinctrl, bus recovery not supported [ 1.161373] i2c i2c-0: IMX I2C adapter registered [ 1.164914] imx-i2c 2020000.i2c: can't get pinctrl, bus recovery not supported [ 1.170923] i2c i2c-1: IMX I2C adapter registered [ 1.174438] imx-i2c 2040000.i2c: can't get pinctrl, bus recovery not supported [ 1.180489] i2c i2c-2: IMX I2C adapter registered [ 1.184034] pps_core: LinuxPPS API ver. 1 registered [ 1.187711] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giome...@linux.it> [ 1.195563] PTP clock support registered [ 1.198926] clocksource: Switched to clocksource arch_sys_counter [ 1.409271] VFS: Disk quotas dquot_6.6.0 [ 1.411929] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.423147] NET: Registered protocol family 2 [ 1.426524] tcp_listen_portaddr_hash hash table entries: 4096 (order: 6, 294912 bytes, linear) [ 1.434212] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.441038] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes, linear) [ 1.452946] TCP: Hash tables configured (established 65536 bind 65536) [ 1.458362] UDP hash table entries: 4096 (order: 7, 655360 bytes, linear) [ 1.464637] UDP-Lite hash table entries: 4096 (order: 7, 655360 bytes, linear) [ 1.471476] NET: Registered protocol family 1 [ 1.474948] RPC: Registered named UNIX socket transport module. [ 1.479561] RPC: Registered udp transport module. [ 1.482958] RPC: Registered tcp transport module. [ 1.486348] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.491485] PCI: CLS 0 bytes, default 64 [ 1.495248] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 1.502280] kvm: Limiting the IPA size due to kernel Virtual Address limit [ 1.507851] kvm [1]: IPA Size Limit: 43bits [ 1.511572] kvm [1]: vgic-v2@c0e0000 [ 1.513851] kvm [1]: GIC system register CPU interface enabled [ 1.518687] kvm [1]: vgic interrupt IRQ1 [ 1.521608] kvm [1]: Hyp mode initialized successfully [ 1.535818] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.549175] NFS: Registering the id_resolver key type [ 1.552967] Key type id_resolver registered [ 1.555844] Key type id_legacy registered [ 1.558661] fuse: init (API version 7.31) [ 1.561605] 9p: Installing v9fs 9p2000 file system support [ 1.566505] io scheduler mq-deadline registered [ 1.569734] io scheduler kyber registered [ 1.573894] layerscape-pcie-gen4 3600000.pcie: host bridge /soc/pcie@3600000 ranges: [ 1.580351] layerscape-pcie-gen4 3600000.pcie: MEM 0x9040000000..0x907fffffff -> 0x0040000000 [ 1.588204] layerscape-pcie-gen4 3600000.pcie: PCI host bridge to bus 0000:00 [ 1.594036] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.598216] pci_bus 0000:00: root bus resource [mem 0x9040000000-0x907fffffff] (bus address [0x40000000-0x7fffffff]) [ 1.607459] pci 0000:00:00.0: [1957:8d90] type 01 class 0x060400 [ 1.612198] pci 0000:00:00.0: enabling Extended Tags [ 1.615912] pci 0000:00:00.0: supports D1 D2 [ 1.618869] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.624897] pci 0000:01:00.0: [1cc1:8201] type 00 class 0x010802 [ 1.629666] pci 0000:01:00.0: reg 0x10: [mem 0x9040000000-0x9040003fff 64bit] [ 1.646977] pci 0000:00:00.0: up support 3 enabled 0 [ 1.650628] pci 0000:00:00.0: dn support 2 enabled 0 [ 1.654743] pci 0000:00:00.0: BAR 8: assigned [mem 0x9040000000-0x90400fffff] [ 1.660577] pci 0000:01:00.0: BAR 0: assigned [mem 0x9040000000-0x9040003fff 64bit] [ 1.666945] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 1.670859] pci 0000:00:00.0: bridge window [mem 0x9040000000-0x90400fffff] [ 1.676698] pci 0000:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256 [ 1.683858] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256 [ 1.691047] pcieport 0000:00:00.0: PCIe capabilities: 0x13 [ 1.695230] pcieport 0000:00:00.0: init_service_irqs: -19 [ 1.699429] layerscape-pcie-gen4 3800000.pcie: host bridge /soc/pcie@3800000 ranges: [ 1.705877] layerscape-pcie-gen4 3800000.pcie: MEM 0xa040000000..0xa07fffffff -> 0x0040000000 [ 1.713713] layerscape-pcie-gen4 3800000.pcie: PCI host bridge to bus 0001:00 [ 1.719544] pci_bus 0001:00: root bus resource [bus 00-ff] [ 1.723724] pci_bus 0001:00: root bus resource [mem 0xa040000000-0xa07fffffff] (bus address [0x40000000-0x7fffffff]) [ 1.732950] pci 0001:00:00.0: [1957:8d90] type 01 class 0x060400 [ 1.737694] pci 0001:00:00.0: enabling Extended Tags [ 1.741407] pci 0001:00:00.0: supports D1 D2 [ 1.744371] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.750511] pci 0001:01:00.0: [15b3:6750] type 00 class 0x020000 [ 1.755600] pci 0001:01:00.0: reg 0x10: [mem 0xa040000000-0xa0400fffff 64bit] [ 1.761632] pci 0001:01:00.0: reg 0x18: [mem 0xa040800000-0xa040ffffff 64bit pref] [ 1.768286] pci 0001:01:00.0: reg 0x30: [mem 0xa041000000-0xa0410fffff pref] [ 1.787013] pci 0001:00:00.0: up support 3 enabled 0 [ 1.790665] pci 0001:00:00.0: dn support 1 enabled 0 [ 1.794787] pci 0001:00:00.0: BAR 9: assigned [mem 0xa040000000-0xa0407fffff 64bit pref] [ 1.801572] pci 0001:00:00.0: BAR 8: assigned [mem 0xa040800000-0xa0409fffff] [ 1.807404] pci 0001:01:00.0: BAR 2: assigned [mem 0xa040000000-0xa0407fffff 64bit pref] [ 1.814316] pci 0001:01:00.0: BAR 0: assigned [mem 0xa040800000-0xa0408fffff 64bit] [ 1.820793] pci 0001:01:00.0: BAR 6: assigned [mem 0xa040900000-0xa0409fffff pref] [ 1.827056] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 1.830977] pci 0001:00:00.0: bridge window [mem 0xa040800000-0xa0409fffff] [ 1.836806] pci 0001:00:00.0: bridge window [mem 0xa040000000-0xa0407fffff 64bit pref] [ 1.843601] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256 [ 1.850903] pci 0001:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256 [ 1.858079] pcieport 0001:00:00.0: PCIe capabilities: 0x13 [ 1.862260] pcieport 0001:00:00.0: init_service_irqs: -19 [ 1.867322] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.874084] arm-smmu 5000000.iommu: probing hardware configuration... [ 1.879225] arm-smmu 5000000.iommu: SMMUv2 with: [ 1.882529] arm-smmu 5000000.iommu: stage 1 translation [ 1.886534] arm-smmu 5000000.iommu: stage 2 translation [ 1.890539] arm-smmu 5000000.iommu: nested translation [ 1.894457] arm-smmu 5000000.iommu: coherent table walk [ 1.898461] arm-smmu 5000000.iommu: (IDR0.CTTW overridden by FW configuration) [ 1.904464] arm-smmu 5000000.iommu: stream matching with 128 register groups [ 1.910294] arm-smmu 5000000.iommu: 64 context banks (0 stage-2 only) [ 1.915519] arm-smmu 5000000.iommu: Supported page sizes: 0x61311000 [ 1.920653] arm-smmu 5000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.925786] arm-smmu 5000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.946137] loop: module loaded [ 1.948871] nvme nvme0: pci function 0000:01:00.0 [ 1.952710] ahci-qoriq 3200000.sata: 3200000.sata supply ahci not found, using dummy regulator [ 1.960072] ahci-qoriq 3200000.sata: 3200000.sata supply phy not found, using dummy regulator [ 1.967335] ahci-qoriq 3200000.sata: 3200000.sata supply target not found, using dummy regulator [ 1.974957] ahci-qoriq 3200000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 1.982613] ahci-qoriq 3200000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst [ 1.991486] scsi host0: ahci-qoriq [ 1.993859] ata1: SATA max UDMA/133 mmio [mem 0x03200000-0x0320ffff] port 0x100 irq 24 [ 2.000561] ahci-qoriq 3210000.sata: 3210000.sata supply ahci not found, using dummy regulator [ 2.007916] ahci-qoriq 3210000.sata: 3210000.sata supply phy not found, using dummy regulator [ 2.015194] ahci-qoriq 3210000.sata: 3210000.sata supply target not found, using dummy regulator [ 2.022788] ahci-qoriq 3210000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 2.030443] ahci-qoriq 3210000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst [ 2.039256] scsi host1: ahci-qoriq [ 2.041507] ata2: SATA max UDMA/133 mmio [mem 0x03210000-0x0321ffff] port 0x100 irq 25 [ 2.048196] ahci-qoriq 3220000.sata: 3220000.sata supply ahci not found, using dummy regulator [ 2.055550] ahci-qoriq 3220000.sata: 3220000.sata supply phy not found, using dummy regulator [ 2.062811] ahci-qoriq 3220000.sata: 3220000.sata supply target not found, using dummy regulator [ 2.070378] ahci-qoriq 3220000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 2.078032] ahci-qoriq 3220000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst [ 2.084600] nvme nvme0: 15/0/0 default/read/poll queues [ 2.086837] scsi host2: ahci-qoriq [ 2.092574] ata3: SATA max UDMA/133 mmio [mem 0x03220000-0x0322ffff] port 0x100 irq 26 [ 2.092925] nvme0n1: p1 p2 [ 2.099262] ahci-qoriq 3230000.sata: 3230000.sata supply ahci not found, using dummy regulator [ 2.108028] ahci-qoriq 3230000.sata: 3230000.sata supply phy not found, using dummy regulator [ 2.115290] ahci-qoriq 3230000.sata: 3230000.sata supply target not found, using dummy regulator [ 2.122864] ahci-qoriq 3230000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 2.130518] ahci-qoriq 3230000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst [ 2.139348] scsi host3: ahci-qoriq [ 2.141598] ata4: SATA max UDMA/133 mmio [mem 0x03230000-0x0323ffff] port 0x100 irq 27 [ 2.149539] libphy: Fixed MDIO Bus: probed [ 2.152802] libphy: Freescale XGMAC MDIO Bus: probed [ 2.156799] Qualcomm Atheros AR8035 8b96000:01: probe: irq=-1 [ 2.161245] Qualcomm Atheros AR8035 8b96000:01: probe: irq=-1 [ 2.165963] libphy: Freescale XGMAC MDIO Bus: probed [ 2.170081] dwc3 3100000.usb: Failed to get clk 'ref': -2 [ 2.174468] dwc3 3110000.usb: Failed to get clk 'ref': -2 [ 2.179050] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.184274] ehci-platform: EHCI generic platform driver [ 2.188257] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.193140] ohci-platform: OHCI generic platform driver [ 2.197268] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.201470] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.207946] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010 [ 2.216064] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0x03100000 [ 2.221416] hub 1-0:1.0: USB hub found [ 2.223894] hub 1-0:1.0: 1 port detected [ 2.226762] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.230951] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.237305] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 2.242572] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.249744] hub 2-0:1.0: USB hub found [ 2.252209] hub 2-0:1.0: 1 port detected [ 2.255118] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 2.259309] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 2.265760] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010 [ 2.273872] xhci-hcd xhci-hcd.1.auto: irq 23, io mem 0x03110000 [ 2.279084] hub 3-0:1.0: USB hub found [ 2.281538] hub 3-0:1.0: 1 port detected [ 2.284380] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 2.288571] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 2.294930] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 2.300190] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.307363] hub 4-0:1.0: USB hub found [ 2.309817] hub 4-0:1.0: 1 port detected [ 2.312750] usbcore: registered new interface driver usb-storage [ 2.317173] ata1: SATA link down (SStatus 0 SControl 300) [ 2.317696] mousedev: PS/2 mouse device common for all mice [ 2.331955] rtc-pcf2127-i2c 2-0051: registered as rtc0 [ 2.335876] i2c /dev entries driver [ 2.339327] i2c i2c-0: Added multiplexed i2c bus 3 [ 2.343067] i2c i2c-0: Added multiplexed i2c bus 4 [ 2.346783] i2c i2c-0: Added multiplexed i2c bus 5 [ 2.350507] i2c i2c-0: Added multiplexed i2c bus 6 [ 2.354164] i2c i2c-0: Added multiplexed i2c bus 7 [ 2.357821] i2c i2c-0: Added multiplexed i2c bus 8 [ 2.361159] ata2: SATA link down (SStatus 0 SControl 300) [ 2.361480] i2c i2c-0: Added multiplexed i2c bus 9 [ 2.369047] i2c i2c-0: Added multiplexed i2c bus 10 [ 2.372627] pca954x 0-0077: registered 8 multiplexed busses for I2C mux pca9547 [ 2.378783] IR NEC protocol handler initialized [ 2.382010] IR RC5(x/sz) protocol handler initialized [ 2.385755] IR RC6 protocol handler initialized [ 2.388977] IR JVC protocol handler initialized [ 2.392200] IR Sony protocol handler initialized [ 2.395513] IR SANYO protocol handler initialized [ 2.398903] IR Sharp protocol handler initialized [ 2.402300] IR MCE Keyboard/mouse protocol handler initialized [ 2.406827] IR XMP protocol handler initialized [ 2.413367] amc6821 4-0018: Error reading configuration register, aborting. [ 2.417180] ata3: SATA link down (SStatus 0 SControl 300) [ 2.419034] amc6821: probe of 4-0018 failed with error -5 [ 2.427436] sdhci: Secure Digital Host Controller Interface driver [ 2.432314] sdhci: Copyright(c) Pierre Ossman [ 2.435384] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.461157] ata4: SATA link down (SStatus 0 SControl 300) [ 2.465487] mmc0: SDHCI controller on 2140000.esdhc [2140000.esdhc] using ADMA 64-bit [ 2.494954] mmc1: SDHCI controller on 2150000.esdhc [2150000.esdhc] using ADMA 64-bit [ 2.502071] ledtrig-cpu: registered to indicate activity on CPUs [ 2.507175] caam 8000000.crypto: device ID = 0x0a1a020000000000 (Era 10) [ 2.508538] mmc0: new high speed SDHC card at address aaaa [ 2.512572] caam 8000000.crypto: job rings = 3, qi = 1 [ 2.521006] mmcblk0: mmc0:aaaa SU04G 3.69 GiB (ro) [ 2.525840] caam algorithms registered in /proc/crypto [ 2.532365] caam 8000000.crypto: caam pkc algorithms registered in /proc/crypto [ 2.539400] caam_jr 8010000.jr: registering rng-caam [ 2.543736] usbcore: registered new interface driver usbhid [ 2.548007] usbhid: USB HID core driver [ 2.551148] NET: Registered protocol family 10 [ 2.554963] Segment Routing with IPv6 [ 2.557343] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.562313] NET: Registered protocol family 17 [ 2.565629] 9pnet: Installing 9P2000 support [ 2.568641] Key type dns_resolver registered [ 2.571820] registered taskstats version 1 [ 2.578646] fsl_mc_dprc dprc.1: Adding to iommu group 0 [ 2.584473] mmc1: new HS400 MMC card at address 0001 [ 2.592566] mmcblk1: mmc1:0001 DF4064 58.2 GiB [ 2.595945] mmcblk1boot0: mmc1:0001 DF4064 partition 1 4.00 MiB [ 2.600717] mmcblk1boot1: mmc1:0001 DF4064 partition 2 4.00 MiB [ 2.605471] mmcblk1rpmb: mmc1:0001 DF4064 partition 3 4.00 MiB, chardev (246:0) [ 2.612749] mmcblk1: p1 p2 [ 2.622945] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 2.642000] fsl_dpaa2_eth dpni.0: Adding to iommu group 0 [ 2.646254] fsl_mc_dprc dprc.1: No more resources of type dpmcp left [ 2.651688] fsl_mc_allocator dpbp.1: Adding to iommu group 0 [ 2.656161] fsl_mc_allocator dpbp.0: Adding to iommu group 0 [ 2.662117] fsl_mc_allocator dpmcp.35: Adding to iommu group 0 [ 2.667765] fsl_mc_allocator dpmcp.34: Adding to iommu group 0 [ 2.673422] fsl_mc_allocator dpmcp.33: Adding to iommu group 0 [ 2.679071] fsl_mc_allocator dpmcp.32: Adding to iommu group 0 [ 2.684267] hub 3-1:1.0: USB hub found [ 2.684727] fsl_mc_allocator dpmcp.31: Adding to iommu group 0 [ 2.686736] hub 3-1:1.0: 4 ports detected [ 2.692343] fsl_mc_allocator dpmcp.30: Adding to iommu group 0 [ 2.699627] fsl_mc_allocator dpmcp.29: Adding to iommu group 0 [ 2.705265] fsl_mc_allocator dpmcp.28: Adding to iommu group 0 [ 2.710952] fsl_mc_allocator dpmcp.27: Adding to iommu group 0 [ 2.716596] fsl_mc_allocator dpmcp.26: Adding to iommu group 0 [ 2.722243] fsl_mc_allocator dpmcp.25: Adding to iommu group 0 [ 2.727897] fsl_mc_allocator dpmcp.24: Adding to iommu group 0 [ 2.733550] fsl_mc_allocator dpmcp.23: Adding to iommu group 0 [ 2.739198] fsl_mc_allocator dpmcp.22: Adding to iommu group 0 [ 2.744853] fsl_mc_allocator dpmcp.21: Adding to iommu group 0 [ 2.750495] fsl_mc_allocator dpmcp.20: Adding to iommu group 0 [ 2.756161] fsl_mc_allocator dpmcp.19: Adding to iommu group 0 [ 2.761803] fsl_mc_allocator dpmcp.18: Adding to iommu group 0 [ 2.767473] fsl_mc_allocator dpmcp.17: Adding to iommu group 0 [ 2.773117] fsl_mc_allocator dpmcp.16: Adding to iommu group 0 [ 2.778768] fsl_mc_allocator dpmcp.15: Adding to iommu group 0 [ 2.782959] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 2.784414] fsl_mc_allocator dpmcp.14: Adding to iommu group 0 [ 2.794669] fsl_mc_allocator dpmcp.13: Adding to iommu group 0 [ 2.800309] fsl_mc_allocator dpmcp.12: Adding to iommu group 0 [ 2.805969] fsl_mc_allocator dpmcp.11: Adding to iommu group 0 [ 2.811625] fsl_mc_allocator dpmcp.10: Adding to iommu group 0 [ 2.817271] fsl_mc_allocator dpmcp.9: Adding to iommu group 0 [ 2.822845] fsl_mc_allocator dpmcp.8: Adding to iommu group 0 [ 2.828243] hub 4-1:1.0: USB hub found [ 2.828420] fsl_mc_allocator dpmcp.7: Adding to iommu group 0 [ 2.830710] hub 4-1:1.0: 4 ports detected [ 2.836276] fsl_mc_allocator dpmcp.6: Adding to iommu group 0 [ 2.843415] fsl_mc_allocator dpmcp.5: Adding to iommu group 0 [ 2.848975] fsl_mc_allocator dpmcp.4: Adding to iommu group 0 [ 2.851038] random: fast init done [ 2.854534] fsl_mc_allocator dpmcp.3: Adding to iommu group 0 [ 2.861060] fsl_mc_allocator dpmcp.2: Adding to iommu group 0 [ 2.866622] fsl_mc_allocator dpmcp.1: Adding to iommu group 0 [ 2.874308] fsl_mc_dpio dpio.15: Adding to iommu group 0 [ 2.882022] fsl_mc_dpio dpio.15: probed [ 2.888261] fsl_mc_dpio dpio.14: Adding to iommu group 0 [ 2.895912] fsl_mc_dpio dpio.14: probed [ 2.902061] fsl_mc_dpio dpio.13: Adding to iommu group 0 [ 2.909710] fsl_mc_dpio dpio.13: probed [ 2.915939] fsl_mc_dpio dpio.12: Adding to iommu group 0 [ 2.923591] fsl_mc_dpio dpio.12: probed [ 2.929752] fsl_mc_dpio dpio.11: Adding to iommu group 0 [ 2.937396] fsl_mc_dpio dpio.11: probed [ 2.943628] fsl_mc_dpio dpio.10: Adding to iommu group 0 [ 2.951283] fsl_mc_dpio dpio.10: probed [ 2.957446] fsl_mc_dpio dpio.9: Adding to iommu group 0 [ 2.965012] fsl_mc_dpio dpio.9: probed [ 2.971167] fsl_mc_dpio dpio.8: Adding to iommu group 0 [ 2.978776] fsl_mc_dpio dpio.8: probed [ 2.984923] fsl_mc_dpio dpio.7: Adding to iommu group 0 [ 2.992537] fsl_mc_dpio dpio.7: probed [ 2.998684] fsl_mc_dpio dpio.6: Adding to iommu group 0 [ 3.006299] fsl_mc_dpio dpio.6: probed [ 3.012440] fsl_mc_dpio dpio.5: Adding to iommu group 0 [ 3.020064] fsl_mc_dpio dpio.5: probed [ 3.026190] fsl_mc_dpio dpio.4: Adding to iommu group 0 [ 3.033754] fsl_mc_dpio dpio.4: probed [ 3.038937] usb 3-1.3: new high-speed USB device number 3 using xhci-hcd [ 3.039844] fsl_mc_dpio dpio.3: Adding to iommu group 0 [ 3.051890] fsl_mc_dpio dpio.3: probed [ 3.058009] fsl_mc_dpio dpio.2: Adding to iommu group 0 [ 3.065609] fsl_mc_dpio dpio.2: probed [ 3.071763] fsl_mc_dpio dpio.1: Adding to iommu group 0 [ 3.079384] fsl_mc_dpio dpio.1: probed [ 3.085521] fsl_mc_dpio dpio.0: Adding to iommu group 0 [ 3.093136] fsl_mc_dpio dpio.0: probed [ 3.096201] fsl_mc_allocator dpcon.31: Adding to iommu group 0 [ 3.100196] hub 3-1.3:1.0: USB hub found [ 3.100860] fsl_mc_allocator dpcon.30: Adding to iommu group 0 [ 3.103374] hub 3-1.3:1.0: 4 ports detected [ 3.107983] fsl_mc_allocator dpcon.29: Adding to iommu group 0 [ 3.115381] fsl_mc_allocator dpcon.28: Adding to iommu group 0 [ 3.120030] fsl_mc_allocator dpcon.27: Adding to iommu group 0 [ 3.124682] fsl_mc_allocator dpcon.26: Adding to iommu group 0 [ 3.129333] fsl_mc_allocator dpcon.25: Adding to iommu group 0 [ 3.133987] fsl_mc_allocator dpcon.24: Adding to iommu group 0 [ 3.138642] fsl_mc_allocator dpcon.23: Adding to iommu group 0 [ 3.143294] fsl_mc_allocator dpcon.22: Adding to iommu group 0 [ 3.147946] fsl_mc_allocator dpcon.21: Adding to iommu group 0 [ 3.152597] fsl_mc_allocator dpcon.20: Adding to iommu group 0 [ 3.157250] fsl_mc_allocator dpcon.19: Adding to iommu group 0 [ 3.161903] fsl_mc_allocator dpcon.18: Adding to iommu group 0 [ 3.166559] fsl_mc_allocator dpcon.17: Adding to iommu group 0 [ 3.171217] fsl_mc_allocator dpcon.16: Adding to iommu group 0 [ 3.175871] fsl_mc_allocator dpcon.15: Adding to iommu group 0 [ 3.180533] fsl_mc_allocator dpcon.14: Adding to iommu group 0 [ 3.185188] fsl_mc_allocator dpcon.13: Adding to iommu group 0 [ 3.189844] fsl_mc_allocator dpcon.12: Adding to iommu group 0 [ 3.194499] fsl_mc_allocator dpcon.11: Adding to iommu group 0 [ 3.199153] fsl_mc_allocator dpcon.10: Adding to iommu group 0 [ 3.203810] fsl_mc_allocator dpcon.9: Adding to iommu group 0 [ 3.208385] fsl_mc_allocator dpcon.8: Adding to iommu group 0 [ 3.212956] fsl_mc_allocator dpcon.7: Adding to iommu group 0 [ 3.217526] fsl_mc_allocator dpcon.6: Adding to iommu group 0 [ 3.222096] fsl_mc_allocator dpcon.5: Adding to iommu group 0 [ 3.226667] fsl_mc_allocator dpcon.4: Adding to iommu group 0 [ 3.231237] fsl_mc_allocator dpcon.3: Adding to iommu group 0 [ 3.235812] fsl_mc_allocator dpcon.2: Adding to iommu group 0 [ 3.240383] fsl_mc_allocator dpcon.1: Adding to iommu group 0 [ 3.244955] fsl_mc_allocator dpcon.0: Adding to iommu group 0 [ 3.252565] fsl_mc_dprc dprc.1: DPRC device bound to driver [ 3.257032] libphy: SFP I2C Bus: probed [ 3.259658] sfp sfp-0: Host maximum power 2.0W [ 3.262929] sfp sfp-0: No tx_disable pin: SFP modules will always be emitting. [ 3.269061] libphy: SFP I2C Bus: probed [ 3.271642] sfp sfp-1: Host maximum power 2.0W [ 3.274884] sfp sfp-1: No tx_disable pin: SFP modules will always be emitting. [ 3.280979] libphy: SFP I2C Bus: probed [ 3.283559] sfp sfp-2: Host maximum power 2.0W [ 3.286819] sfp sfp-2: No tx_disable pin: SFP modules will always be emitting. [ 3.292948] libphy: SFP I2C Bus: probed [ 3.295529] sfp sfp-3: Host maximum power 2.0W [ 3.298768] sfp sfp-3: No tx_disable pin: SFP modules will always be emitting. [ 3.456609] fsl_dpaa2_eth dpni.0 (unnamed net_device) (uninitialized): PHY [8b96000:01] driver [Qualcomm Atheros AR8035] (irq=POLL) [ 3.467153] fsl_dpaa2_eth dpni.0 (unnamed net_device) (uninitialized): phy: setting supported 000,00000200,000062ea advertising 000,00000200,000062ea [ 3.468341] fsl_dpaa2_eth dpni.0: Probed interface eth0 [ 3.472672] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 3.479780] rtc-pcf2127-i2c 2-0051: setting system clock to 2020-02-28T09:56:18 UTC (1582883778) [ 3.490224] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.497082] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. [ 3.503193] devtmpfs: mounted [ 3.505079] Freeing unused kernel memory: 960K [ 3.534993] Run /sbin/init as init process When asking for more network interfaces, more "Adding to iommu group" messages get spat out: [ 446.040825] fsl_dpaa2_eth dpni.1: Adding to iommu group 0 [ 446.201254] libphy: Freescale XGMAC MDIO Bus: probed [ 446.206552] fsl_dpaa2_eth dpni.1: Probed interface eth1 [ 446.210715] fsl_mc_allocator dpbp.2: Adding to iommu group 0 [ 446.216838] fsl_mc_allocator dpmcp.36: Adding to iommu group 0 [ 446.224808] fsl_mc_allocator dpcon.47: Adding to iommu group 0 [ 446.229935] fsl_mc_allocator dpcon.46: Adding to iommu group 0 [ 446.234685] fsl_mc_allocator dpcon.45: Adding to iommu group 0 [ 446.239431] fsl_mc_allocator dpcon.44: Adding to iommu group 0 [ 446.244179] fsl_mc_allocator dpcon.43: Adding to iommu group 0 [ 446.251725] fsl_mc_allocator dpcon.42: Adding to iommu group 0 [ 446.258952] fsl_mc_allocator dpcon.41: Adding to iommu group 0 [ 446.263666] fsl_mc_allocator dpcon.40: Adding to iommu group 0 [ 446.268377] fsl_mc_allocator dpcon.39: Adding to iommu group 0 [ 446.273086] fsl_mc_allocator dpcon.38: Adding to iommu group 0 [ 446.277814] fsl_mc_allocator dpcon.37: Adding to iommu group 0 [ 446.282517] fsl_mc_allocator dpcon.36: Adding to iommu group 0 [ 446.287228] fsl_mc_allocator dpcon.35: Adding to iommu group 0 [ 446.291935] fsl_mc_allocator dpcon.34: Adding to iommu group 0 [ 446.296641] fsl_mc_allocator dpcon.33: Adding to iommu group 0 [ 446.301354] fsl_mc_allocator dpcon.32: Adding to iommu group 0 [ 446.893939] fsl_dpaa2_eth dpni.2: Adding to iommu group 0 [ 447.052868] libphy: Freescale XGMAC MDIO Bus: probed [ 447.058223] fsl_dpaa2_eth dpni.2: Probed interface eth2 [ 447.062425] fsl_mc_allocator dpbp.3: Adding to iommu group 0 [ 447.068813] fsl_mc_allocator dpmcp.37: Adding to iommu group 0 [ 447.074280] fsl_mc_allocator dpcon.63: Adding to iommu group 0 [ 447.078995] fsl_mc_allocator dpcon.62: Adding to iommu group 0 [ 447.088690] fsl_mc_allocator dpcon.61: Adding to iommu group 0 [ 447.093639] fsl_mc_allocator dpcon.60: Adding to iommu group 0 [ 447.098369] fsl_mc_allocator dpcon.59: Adding to iommu group 0 [ 447.103089] fsl_mc_allocator dpcon.58: Adding to iommu group 0 [ 447.107811] fsl_mc_allocator dpcon.57: Adding to iommu group 0 [ 447.112525] fsl_mc_allocator dpcon.56: Adding to iommu group 0 [ 447.117244] fsl_mc_allocator dpcon.55: Adding to iommu group 0 [ 447.121962] fsl_mc_allocator dpcon.54: Adding to iommu group 0 [ 447.126680] fsl_mc_allocator dpcon.53: Adding to iommu group 0 [ 447.131392] fsl_mc_allocator dpcon.52: Adding to iommu group 0 [ 447.136107] fsl_mc_allocator dpcon.51: Adding to iommu group 0 [ 447.140820] fsl_mc_allocator dpcon.50: Adding to iommu group 0 [ 447.145535] fsl_mc_allocator dpcon.49: Adding to iommu group 0 [ 447.150249] fsl_mc_allocator dpcon.48: Adding to iommu group 0 [ 447.710694] fsl_dpaa2_eth dpni.3: Adding to iommu group 0 [ 447.888120] libphy: Freescale XGMAC MDIO Bus: probed [ 447.893479] fsl_dpaa2_eth dpni.3: Probed interface eth3 [ 447.897740] fsl_mc_allocator dpbp.4: Adding to iommu group 0 [ 447.904488] fsl_mc_allocator dpmcp.38: Adding to iommu group 0 [ 447.909994] fsl_mc_allocator dpcon.79: Adding to iommu group 0 [ 447.914717] fsl_mc_allocator dpcon.78: Adding to iommu group 0 [ 447.919852] fsl_mc_allocator dpcon.77: Adding to iommu group 0 [ 447.924720] fsl_mc_allocator dpcon.76: Adding to iommu group 0 [ 447.931979] fsl_mc_allocator dpcon.75: Adding to iommu group 0 [ 447.939172] fsl_mc_allocator dpcon.74: Adding to iommu group 0 [ 447.943886] fsl_mc_allocator dpcon.73: Adding to iommu group 0 [ 447.948604] fsl_mc_allocator dpcon.72: Adding to iommu group 0 [ 447.953319] fsl_mc_allocator dpcon.71: Adding to iommu group 0 [ 447.958035] fsl_mc_allocator dpcon.70: Adding to iommu group 0 [ 447.965445] fsl_mc_allocator dpcon.69: Adding to iommu group 0 [ 447.972653] fsl_mc_allocator dpcon.68: Adding to iommu group 0 [ 447.977376] fsl_mc_allocator dpcon.67: Adding to iommu group 0 [ 447.982097] fsl_mc_allocator dpcon.66: Adding to iommu group 0 [ 447.986816] fsl_mc_allocator dpcon.65: Adding to iommu group 0 [ 447.991532] fsl_mc_allocator dpcon.64: Adding to iommu group 0 [ 448.737198] fsl_dpaa2_eth dpni.4: Adding to iommu group 0 [ 448.894480] libphy: Freescale XGMAC MDIO Bus: probed [ 448.899785] fsl_dpaa2_eth dpni.4: Probed interface eth4 [ 448.904077] fsl_mc_allocator dpbp.5: Adding to iommu group 0 [ 448.909817] fsl_mc_allocator dpmcp.39: Adding to iommu group 0 [ 448.915340] fsl_mc_allocator dpcon.95: Adding to iommu group 0 [ 448.920068] fsl_mc_allocator dpcon.94: Adding to iommu group 0 [ 448.924789] fsl_mc_allocator dpcon.93: Adding to iommu group 0 [ 448.929689] fsl_mc_allocator dpcon.92: Adding to iommu group 0 [ 448.934436] fsl_mc_allocator dpcon.91: Adding to iommu group 0 [ 448.939159] fsl_mc_allocator dpcon.90: Adding to iommu group 0 [ 448.943882] fsl_mc_allocator dpcon.89: Adding to iommu group 0 [ 448.948607] fsl_mc_allocator dpcon.88: Adding to iommu group 0 [ 448.953327] fsl_mc_allocator dpcon.87: Adding to iommu group 0 [ 448.958050] fsl_mc_allocator dpcon.86: Adding to iommu group 0 [ 448.962771] fsl_mc_allocator dpcon.85: Adding to iommu group 0 [ 448.967499] fsl_mc_allocator dpcon.84: Adding to iommu group 0 [ 448.972219] fsl_mc_allocator dpcon.83: Adding to iommu group 0 [ 448.976941] fsl_mc_allocator dpcon.82: Adding to iommu group 0 [ 448.981669] fsl_mc_allocator dpcon.81: Adding to iommu group 0 [ 448.986391] fsl_mc_allocator dpcon.80: Adding to iommu group 0 # dmesg |grep 'Adding to iommu' | wc -l 164 # dmesg |grep -v 'Adding to iommu' | wc -l 551 So, 23% of the kernel messages on this platform are "Adding to iommu", which is excessive. -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up According to speedtest.net: 11.9Mbps down 500kbps up _______________________________________________ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
